text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

Jogbox (NJB) Kit with cable, 4 m
Jogbox (NJB) Kit with cable, 4 m
ID: G59682600
Prezzo:  6.355,00 zł
Breve panoramica: 

Next Jogbox (NJB) Kit including cradle and cable (4 m).
In giacenza - Spedizione in 1-2 giorni
Jogbox (NJB) Kit with cable, 6 m
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prezzo:  6.424,00 zł
Breve panoramica: 

Next Jogbox (NJB) Kit including cradle and cable (6 m).
In giacenza - Spedizione in 1-2 giorni
Next Jogbox (NJB) Kit with cable, 15 m
Next Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prezzo:  7.301,00 zł
Breve panoramica: 

Next Jogbox (NJB) Kit including cradle and cable (15 m).
In giacenza - Spedizione in 1-2 giorni
HR-X3-P Stylus Changer Port
HR-X3-P Stylus Changer Port
ID: M00-114-109-000
Prezzo:  705,00 zł
Breve panoramica:  Stylus changer port for HP-S-X3
  • Previous Part Number:  03939171
  • Sensore compatibile:  HP-S-X3
In giacenza - Spedizione in 1-2 giorni
HR-XS-P Stylus Changer Port
HR-XS-P Stylus Changer Port
ID: M00-153-285-000
Prezzo:  1.329,00 zł
Breve panoramica:  Stylus changer port for HP-S-X5, HP-S-X5 HD, LSP-S2 and LSP-S4
  • Sensore compatibile:  HP-S-X5, HP-S-X5 HD, LSP-S2, LSP-S4
In giacenza - Spedizione in 1-2 giorni
HR-X1-3P Stylus Changer Ports
HR-X1-3P Stylus Changer Ports
ID: M00-114-213-000
Prezzo:  1.178,00 zł
Breve panoramica:  Triple stylus changer port for scanning sensor HP-S-X1S.
  • Sensore compatibile:  HP-S-X1S
In giacenza - Spedizione in 1-2 giorni
HR-X1-P-SF Stylus Changer Port
HR-X1-P-SF Stylus Changer Port
ID: M00-114-167-000
Prezzo:  1.634,00 zł
Breve panoramica:  Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Sensore compatibile:  HP-S-X1S, HP-S-X1H, HP-S-X1C
In giacenza - Spedizione in 1-2 giorni
HR-X1-P Stylus Changer Port
HR-X1-P Stylus Changer Port
ID: M00-114-113-000
Prezzo:  976,00 zł
Breve panoramica:  Stylus changer port for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Sensore compatibile:  HP-S-X1H, HP-S-X1S, HP-S-X1C
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prezzo:  77,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  20
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Prezzo:  112,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100
  • Diametro:  20
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prezzo:  95,00 zł
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  10
  • Diametro:  15
In giacenza - Spedizione in 1-2 giorni
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  267,00 zł
Breve panoramica:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Lunghezza:  50
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Prezzo:  2.116,00 zł
Breve panoramica: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
In giacenza - Spedizione in 1-2 giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  211,00 zł
Breve panoramica:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Dimensione:  130 x 30 mm
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  6.536,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  172,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 100
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  211,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 250
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  163,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 50
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prezzo:  77,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  30
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prezzo:  95,00 zł
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  25
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni