text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 111 producto(s)

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Precio: $791.00

Probe Compatibility: Absolute Arm RA7
Plug Type: ODU
USB / LAN: LAN
Scanner Compatibility: RS3
Voltage: 2.255V

Existencias disponibles - Envío en 1-2 días

Single-CMM Dryer / Filter (110 V)

ID: H007622

Precio: $1,693.00

Resumen: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Weight: 5,7kg

Existencias disponibles - Envío en 1-2 días

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Precio: $3,184.00

Resumen: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12bar
Min. Pressure: 6,9bar
Weight: 25kg

Existencias disponibles - Envío en 1-2 días

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Precio: $498.00

Resumen: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Existencias disponibles - Envío en 1-2 días

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Precio: $427.00

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Existencias disponibles - Envío en 1-2 días

Maintenance Kit (Single-CMM)

ID: H007624

Precio: $166.00

Resumen: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

System Compatibility: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Weight: 0,181kg

Existencias disponibles - Envío en 1-2 días

Upgrade from Filter only to Dryer / Filter

ID: H007626

Precio: $916.00

Resumen: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

System Compatibility: H007623 SINGLE-CMM FILTER ONLY (110V)
Weight: 1,724kg

Existencias disponibles - Envío en 1-2 días

Maintenance Kit (Multi-CMM)

ID: H007625

Precio: $221.00

Resumen: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

System Compatibility: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Weight: 0,363kg

Existencias disponibles - Envío en 1-2 días

Single-CMM Filter only (110 V)

ID: H007623

Precio: $785.00

Resumen: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Weight: 3,72kg

Existencias disponibles - Envío en 1-2 días

Kinematic Fixture Plate 500x500mm (Plain)

ID: KPP-500__500

Precio: $784.00

Resumen: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plate Compatibility : KB-400/400, KB-UNIVL

Existencias disponibles - Envío en 1-2 días

Spring Clamp (M8)

ID: FX-SPRING

Precio: $67.65

Resumen: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Precio: $693.72

Resumen: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plate Compatibility : KB-250/250, KB-UNIVL

Existencias disponibles - Envío en 1-2 días

Thumb Screw M8

ID: FX-THUMB

Precio: $12.30

Resumen: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Threa: M8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Precio: $22.14

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 16mm

Existencias disponibles - Envío en 1-2 días

Hinge Pivot With Handle

ID: FX-PR30HINGE

Precio: $66.42

Resumen: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Precio: $31.98

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 100mm
Diameter: 16mm

Existencias disponibles - Envío en 1-2 días

Spring Nut (M8)

ID: FX-M8SPRGNUT

Precio: $43.05

Resumen: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Precio: $1,535.04

Resumen: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.