Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. Werkzeugmaschine

Werkzeugmaschine

LS-C-5.8 Carrying Case
LS-C-5.8 Carrying Case
ID: LS-C-5.8-CASE
Preis: 
Schnellübersicht:  Carrying case for storage and transport of the Hexagon LS-C-5.8 Laser Scanner Systems for machine tools.
  • Dimensione:  464 x 363 x 176 mm
  • Materiale:  Plastics
  • Compatibilità:  LS-C-5.8
Auf Lager – Versand 1–2 Tage
Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
ID: 3D-FI Extension 45
Preis: 
Schnellübersicht:  Extension with 45° angle for calibration balls for machine tools.
Auf Lager – Versand 1–2 Tage
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
ID: H00027433
Preis: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Filetto / Collegamento:  M4
  • Materiale punta:  Nitruro di silicio
  • Diametro punta (D):  2mm
  • Lunghezza (L):  19mm
NICHT ZUTREFFEND
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Preis:  541,00 €
Schnellübersicht: 

Short description Text
Auf Lager – Versand 1–2 Tage
M4-Stylus (R-2-TC-1.5-L50)
M4-Stylus (R-2-TC-1.5-L50)
ID: H00046671
Preis:  118,00 €
Schnellübersicht: 

Short description Text
Auf Lager – Versand 1–2 Tage
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
ID: D28-CAT50-W
Preis:  246,00 €
Schnellübersicht: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Auf Lager – Versand 1–2 Tage
M8-QUAL sphere V2 - Standard (D = 25.4 mm)
M8-QUAL sphere V2 - Standard (D = 25.4 mm)
ID: 03939542
Preis:  €1,730.00
Schnellübersicht:  Calibration sphere for use with laser scanners for machine tools.
Auf Lager – Versand 1–2 Tage
Calibration Pin (D = 5 mm)
Calibration Pin (D = 5 mm)
ID: 5209
Preis:  €96.00
Schnellübersicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diametro:  5mm
  • Lunghezza:  120mm
  • Applicazione:  Laser Tool Setter Calibration
  • Materiale:  Steel, hardened
Auf Lager – Versand 1–2 Tage
Calibration Pin (D = 10 mm)
Calibration Pin (D = 10 mm)
ID: 4286
Preis:  €103.00
Schnellübersicht:  Calibration pin (D = 10 mm). For use on machine tools.
  • Diametro:  10mm
  • Lunghezza:  120mm
  • Applicazione:  Laser Tool Setter Calibration
  • Materiale:  Steel, hardened
Auf Lager – Versand 1–2 Tage
Battery (3.6 V / 1/2AA)
Battery (3.6 V / 1/2AA)
ID: 4316
Preis:  €5.50
Schnellübersicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Dimensione:  1/2 AA
  • Tensione:  3,6V
  • Capacity:  1.200mAh
  • Compatibilità:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Auf Lager – Versand 1–2 Tage
T-Nut 14 mm
T-Nut 14 mm
ID: 4274
Preis:  €6.50
Schnellübersicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiale:  Tempered Steel
  • Internal Thread:  M12
  • Valore nominale scanalatura a T:  14mm
Auf Lager – Versand 1–2 Tage
M8-Extension for Calibration Set (D = 25 mm)
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Preis:  47,00 €
Schnellübersicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diametro:  25mm
  • Lunghezza:  75mm
  • Materiale:  Acciaio inossidabile
Auf Lager – Versand 1–2 Tage
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Preis:  3,50 €
Schnellübersicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Dimensione:  9 V Block
  • Tensione:  9V
  • Capacity:  1.200mAh
  • Compatibilità:  IRP40.50
Auf Lager – Versand 1–2 Tage
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Preis:  341,00 €
Schnellübersicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiale:  Fibra di carbonio
  • Lunghezza:  200mm
  • Diametro:  25mm
  • External Thread:  M16x1
Auf Lager – Versand 1–2 Tage
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Preis:  465,00 €
Schnellübersicht:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lunghezza:  150mm
  • Diametro:  25mm
  • External Thread:  M16x1
Auf Lager – Versand 1–2 Tage
T-Nut 22 mm
T-Nut 22 mm
ID: 4411
Preis:  26,00 €
Schnellübersicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Auf Lager – Versand 1–2 Tage
T-Nut 12 mm
T-Nut 12 mm
ID: 4418
Preis:  5,50 €
Schnellübersicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Auf Lager – Versand 1–2 Tage
T-Nut 18 mm
T-Nut 18 mm
ID: 4431
Preis:  14,00 €
Schnellübersicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Auf Lager – Versand 1–2 Tage
Storage Box
Storage Box
ID: 4301
Preis:  33,00 €
Schnellübersicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Auf Lager – Versand 1–2 Tage
T-Nut 16 mm
T-Nut 16 mm
ID: 5453
Preis:  12,50 €
Schnellübersicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Auf Lager – Versand 1–2 Tage