Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
SKU: FV-BP200__200C
Price:  263,00 €
Quick overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
Stock goods
Angle Block Slider (M4)
SKU: FV-ANGSLIDER
Price:  19,00 €
Quick overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Stock goods
Corner Bracket
SKU: FV-CNRBRKT
Price:  49,00 €
Quick overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Stock goods
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
SKU: FV-BP200__200F
Price:  337,00 €
Quick overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
Stock goods
Resting Cone (M4)
SKU: FV-CONE
Price:  13,00 €
Quick overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
Stock goods
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
SKU: FC-70SS3-NF
Price:  890,00 €
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Stock goods
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
SKU: FC-70SS3
Price:  900,00 €
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Stock goods
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Price:  884,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Stock goods
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
Price:  31,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Stock goods
Vee Block Twin
SKU: FV-VEETWIN
Price:  42,00 €
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Stock goods
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Price:  9,00 €
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
Stock goods
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  47,00 €
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Stock goods
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  31,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Price:  695,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Stock goods
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  31,00 €
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Stock goods
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
SKU: FX-LATMED
Price:  42,00 €
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  20mm
  • Diametro:  16mm
Stock goods
Swift-Fix - Bronze Kit
SKU: FX-BRONZE__KIT
Price:  968,00 €
Quick overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Stock goods
Pillar 30x30x150mm
SKU: FX-PR30__150
Price:  41,00 €
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 150mm
Stock goods
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Price:  9,00 €
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25mm
  • Diametro:  8mm
Stock goods
Tension Post (M8)
SKU: FX-POST
Price:  25,00 €
Quick overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetto / Collegamento:  M8
Stock goods