text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  14,00 CHF
Breve panoramica:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prezzo:  263,00 CHF
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  263,00 CHF
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  19,00 CHF
Breve panoramica:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  49,00 CHF
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  337,00 CHF
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  13,00 CHF
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  890,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  900,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  884,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  31,00 CHF
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  25,00 CHF
Breve panoramica:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  42,00 CHF
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  236,00 CHF
Breve panoramica:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  9,00 CHF
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  47,00 CHF
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  31,00 CHF
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  695,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  31,00 CHF
Breve panoramica:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?

Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  32,00 CHF
Breve panoramica:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10mm
  • Diametro:  8mm
In giacenza - Spedizione in 1-2 giorni

Available quantity is .
 Backorder eligible quantity is .

Do you wish to continue?

This product is currently not in stock. You can still add to cart, this will be considered as backorder. Do you want to continue?