Macchina Utensile

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'

Thermal insulated hollow taper shank HSK63 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK40 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK50 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT30 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK50 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Adapter from CC11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with CC11 connection.

Taper Shank SK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 5 m / 16.4'

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).