Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Preis:  480,00 CHF
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Codice prodotto:  GB0122-0019
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Lieferzeit 10-15 Tage
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Preis:  560,00 CHF
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Codice prodotto:  GB0122-0008
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
Lieferzeit 10-15 Tage
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Preis:  95,00 CHF
Schnellübersicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Codice prodotto:  FX-UNI/JOINT
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Vee Locator
Vee Locator
ID: FX-VEE
Preis:  77,00 CHF
Schnellübersicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Codice prodotto:  FX-VEE
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Preis:  5.756,00 CHF
Schnellübersicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Codice prodotto:  GB0096-2001
  • Compatibilità CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilità software:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Verifica della lunghezza: 20 minuti, Controllo anelli: 5 Minuti, Verifica della sfera: 5 Minuti, Verifica del polso / della testa del tastatore: 10 Minuti
  • Dimensioni:  Length Bar Length = 300 mm, Diametro dell'anello = 25 mm, Diametro de sfere = 25 mm
Lieferzeit > 25 Tage
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Preis:  8.550,00 CHF
Schnellübersicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Codice prodotto:  GB0122-1000
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Lieferzeit > 25 Tage
Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  33,00 CHF
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Codice prodotto:  FV-FEMALE
Auf Lager - Versand 1-2 Tage
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  279,00 CHF
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Auf Lager - Versand 1-2 Tage
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Preis:  10,00 CHF
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Auf Lager - Versand 1-2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  22,00 CHF
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Codice prodotto:  FV-CONEADJ
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Preis:  819,00 CHF
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP300/300
  • Filetto:  M8
Auf Lager - Versand 1-2 Tage
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Preis:  10,00 CHF
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/25
  • Lunghezza:  25 mm
  • Diametro:  8 mm
Auf Lager - Versand 1-2 Tage
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Preis:  16,00 £
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Codice prodotto:  FV-SOSUP
  • Lunghezza:  6 mm
  • Diametro:  8 mm
Auf Lager - Versand 1-2 Tage
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Preis:  540,00 £
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200P
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Centering Pin
Centering Pin
ID: FV-MALE
Preis:  22,00 £
Schnellübersicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Codice prodotto:  FV-MALE
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Preis:  45,00 £
Schnellübersicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Codice prodotto:  FX-PR30PLATE
  • Dimensione:  130 x 30 mm
Auf Lager - Versand 1-2 Tage
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Preis:  382,00 £
Schnellübersicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Codice prodotto:  FV-SLIDE
  • Filetto:  M4
Auf Lager - Versand 1-2 Tage
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Preis:  36,00 £
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/100
  • Dimensione:  30 x 30 x 100 mm
Auf Lager - Versand 1-2 Tage
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Preis:  45,00 £
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Codice prodotto:  FX-PR30/250
  • Dimensione:  30 x 30 x 250 mm
Auf Lager - Versand 1-2 Tage
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Preis:  35,00 £
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Codice prodotto:  FX-PR30/50
  • Dimensione:  30 x 30 x 50 mm
Auf Lager - Versand 1-2 Tage