Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Preis:  19,00 €
Schnellübersicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Preis:  890,00 €
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Preis:  900,00 €
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  884,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Preis:  31,00 €
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  25,00 €
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Auf Lager – Versand 1–2 Tage
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Preis:  42,00 €
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Auf Lager – Versand 1–2 Tage
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  236,00 €
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Preis:  9,00 €
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
Auf Lager – Versand 1–2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  14,00 €
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Preis:  31,00 €
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Preis:  695,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Auf Lager – Versand 1–2 Tage
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Preis:  31,00 €
Schnellübersicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Preis:  32,00 CHF
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10mm
  • Diametro:  8mm
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Preis:  42,00 CHF
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  20mm
  • Diametro:  16mm
Auf Lager
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Preis:  968,00 CHF
Schnellübersicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Auf Lager
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Preis:  9,00 CHF
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25mm
  • Diametro:  8mm
Auf Lager
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Preis:  25,00 CHF
Schnellübersicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetto / Collegamento:  M8
Auf Lager
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Preis:  14,00 CHF
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  6mm
  • Diametro:  8mm
Auf Lager
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Preis:  1.011,00 CHF
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Auf Lager