text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
ID: GB-0122-1000
Prezzo:  2.801.500,00 zł
Breve panoramica:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
ID: GB0122-0008
Prezzo:  2.376,00 zł
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
In giacenza - Spedizione in 1-2 giorni
ID: GB0122-0019
Prezzo:  2.035,00 zł
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
In giacenza - Spedizione in 1-2 giorni
ID: FV-MALE
Prezzo:  99,00 zł
Breve panoramica:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
ID: FX-SPRING
Prezzo:  212,00 zł
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
ID: FX-THUMB
Prezzo:  43,00 zł
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
ID: FX-SO16__20
Prezzo:  73,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
ID: FX-PR30HINGE
Prezzo:  354,00 zł
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
ID: FX-SO16__100
Prezzo:  108,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
ID: FX-SUB45__120
Prezzo:  251,00 zł
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Dimensione:  120 x 45 x 12 mmmm
In giacenza - Spedizione in 1-2 giorni
ID: FX-BP600__600
Prezzo:  7.949,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
ID: FV-SO__PIN
Prezzo:  78,00 zł
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10mm
  • Diametro:  8mm
In giacenza - Spedizione in 1-2 giorni
ID: FV-CNRBRKT
Prezzo:  216,00 zł
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
ID: FX-CLAMP
Prezzo:  540,00 zł
Breve panoramica:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
ID: FV-VEE
Prezzo:  134,00 zł
Breve panoramica:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In giacenza - Spedizione in 1-2 giorni
ID: FX-SO20__20
Prezzo:  73,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  20mm
In giacenza - Spedizione in 1-2 giorni
ID: FX-SO20__100
Prezzo:  108,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100mm
  • Diametro:  20mm
In giacenza - Spedizione in 1-2 giorni
ID: FX-TOOLS
Prezzo:  112,00 zł
Breve panoramica:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
In giacenza - Spedizione in 1-2 giorni
ID: FX-PILLAR__KIT
Prezzo:  4.277,00 zł
Breve panoramica:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
In giacenza - Spedizione in 1-2 giorni
ID: FX-SO__SUPP
Prezzo:  91,00 zł
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  10mm
  • Diametro:  15mm
In giacenza - Spedizione in 1-2 giorni