text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Katalógus
  3. CMM

CMM

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  884,00 CHF
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Vee Locator
Vee Locator
Azonosító: FV-FEMALE
Ár:  25,00 CHF
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  42,00 CHF
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
Azonosító: FV-GUIDE480
Ár:  236,00 CHF
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  9,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Cone Adjustable (M4)
Cone Adjustable (M4)
Azonosító: FV-CONEADJ
Ár:  14,00 CHF
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
Azonosító: FV-SO8__25
Ár:  40,50 zł
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25mm
  • Diametro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff Support (M4)
Standoff Support (M4)
Azonosító: FV-SOSUP
Ár:  €16.00
Gyors áttekintés:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  6mm
  • Diametro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
Azonosító: FX-BP400__400
Ár:  €1,011.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
Azonosító: FX-BP400__600
Ár:  €1,726.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Centering Pin
Centering Pin
Azonosító: FV-MALE
Ár:  €20.00
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
Azonosító: FX-BP500__500
Ár:  €1,453.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
Azonosító: FX-BP600__600
Ár:  €1,821.00
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__PIN
Ár:  €13.00
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10mm
  • Diametro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Corner Bracket
Corner Bracket
Azonosító: FV-CNRBRKT
Ár:  €49.00
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
Azonosító: FX-ARM
Ár:  373,50 zł
Gyors áttekintés:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Slider Block (M4)
Slider Block (M4)
Azonosító: FV-SLIDER
Ár:  67,50 zł
Gyors áttekintés:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__MAG
Ár:  63,00 zł
Gyors áttekintés:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10mm
  • Diametro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
Azonosító: FC-70SS3-NF
Ár:  4 005,00 zł
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
Azonosító: FC-70SS3
Ár:  4 050,00 zł
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül