text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo

Catalogo

Probe with fixed ball (SS-9.5-SS-50)
Probe with fixed ball (SS-9.5-SS-50)
ID: H00000906-01
Prezzo:  714,00 CHF
Descrizione:  50 mm stainless steel probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00000906-01
  • Diametro punta:  9.5
  • Lunghezza:  50
Consegna > 25 giorni
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
ID: H00033800-01
Prezzo:  830,00 CHF
Descrizione:  Angled probe (45°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Codice prodotto:  H00033800-01
  • Angolo:  45
  • Offset (Y):  38
  • Lunghezza:  149
  • Classe di protezione:  IP54
Consegna > 25 giorni
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
ID: H00033800-05
Prezzo:  830,00 CHF
Descrizione:  Angled probe (60°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Codice prodotto:  H00033800-05
  • Angolo:  60
  • Offset (Y):  57
  • Lunghezza:  149
  • Classe di protezione:  IP54
Consegna > 25 giorni
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
ID: H00033800-08
Prezzo:  830,00 CHF
Descrizione:  Angled probe (60°) with mounted M3-Stylus, tip Ø6 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00033800-08
  • Angolo:  60
  • Diametro punta:  6
  • Offset (Y):  57
  • Lunghezza:  149
Consegna > 25 giorni
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-07
Prezzo:  830,00 CHF
Descrizione:  Angled probe (60°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00033800-07
  • Angolo:  60
  • Diametro punta:  4
  • Offset (Y):  57
  • Lunghezza:  149
Consegna > 25 giorni
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-11
Prezzo:  830,00 CHF
Descrizione:  Angled probe (90°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00033800-11
  • Angolo:  90
  • Diametro punta:  4
  • Offset (Y):  43
  • Lunghezza:  173
Consegna > 25 giorni
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015620
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  15/02/2027
  • Città:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015618
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  18/01/2027
  • Città:  Telford
Classroom Training - PC-DMIS Level 1 CAD - 5 days
Classroom Training - PC-DMIS Level 1 CAD - 5 days
ID: TC-015619
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS CAD Level 1 (Tactile DCC) - Hexagon Technical Centre - 5 days 

Course summary/agenda:
The PC-DMIS Level 1 course is targeted at individuals who have little or no experience with CMMs and want to gain the knowledge to write and execute measurement routines in PC-DMIS. The course starts with the basics of CMM operation and over the week expands to a level of understanding that will enable users to write, execute and edit PC-DMIS measurement routines and create accurate metrology reports for use in the quality control process. Topics covered include - probe definition and calibration, part alignment, measured and constructed features, the generation of automated measurement routines, and reporting measurement results.
  • Class Type:  Classroom Training
  • Start Date:  08/02/2027
  • Città:  Telford
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
Classroom Training - PC-DMIS Advanced Training Bundle - All 5 advanced modules (5 days)
ID: TC-015610
Prezzo: 
Descrizione: 

Classroom Training for PC-DMIS Advanced Training - Bundle at our Hexagon Technical Centre - All Five Modular Courses - 5 days

 

Course summary/agenda:

Module 1 – Advanced alignments

Module 2 – Advanced auto features

Module 3 – Advanced scanning

Module 4 – Flow control and logic

Module 5 – Advanced reporting

 

Aims and objectives:

 

To provide:

• The level of competence and understanding required of PC-DMIS and hardware by anybody involved in the measuring process

• The principal knowledge and practical training for people who are required to use dimensional measurement techniques to complete their daily tasks

• The tools to instil and encourage a questioning culture

 

Enabling:

• An advanced understanding of the metrology process and how your PC-DMIS software is used to maximise efficiency.

 

Course Summary:

 

  • Anyone using measurement equipment in the workplace
  • Manufacturing & engineering personnel
  • Design staff
  • Production supervisors & managers
  • Quality control personnel
  • Measurement technicians
  • Process planners
  • Apprentices
  • Those who have completed Level 1
  • Class Type:  Classroom Training
  • Start Date:  21/09/2026
  • Città:  Telford
MCA45 T-Scan Sensor Automation Cable, 50 m
MCA45 T-Scan Sensor Automation Cable, 50 m
ID: 576197
Prezzo:  2.468,00 CHF
Descrizione:  MCA45 T-Scan Sensor Automation Cable, 50 m
  • Codice prodotto:  576197
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
  • Lunghezza:  50
Tempi di consegna 10-15 Giorni
Probe with M3-Pointer Stylus (C-200)
Probe with M3-Pointer Stylus (C-200)
ID: 54397-18
Prezzo:  536,00 CHF
Descrizione:  Standard probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Codice prodotto:  54397-18
  • Lunghezza:  200
Consegna > 25 giorni
Probe with M3-Stylus (R-4-C-130)
Probe with M3-Stylus (R-4-C-130)
ID: H00000576-05
Prezzo:  536,00 CHF
Descrizione:  130 mm carbon probe with mounted ruby ball M3-Stylus Ø4 mm. For use with all Absolute Arm models.
  • Codice prodotto:  H00000576-05
  • Diametro punta:  4
  • Lunghezza:  130
Consegna > 25 giorni
GEB461 Battery int Li-Ion 10.8 V / 6.7 Ah
GEB461 Battery int Li-Ion 10.8 V / 6.7 Ah
ID: 973449
Prezzo:  361,00 CHF
Descrizione: 

Internal Li-Ion Battery 10.8 V / 6.7 Ah.
  • Codice prodotto:  973449
  • Tensione in ingresso:  10,8 V
  • Uscita:  6,7 Ah
  • Compatibilità del sistema:  Leica Absolute Tracker AT500
Tempi di consegna 10-15 Giorni
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
ID: ROY-CAD**-O
Prezzo:  11.498,00 CHF
Descrizione:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Single User Licence.
  • Codice prodotto:  ROY-CAD++-O
  • Codice prodotto:  ROY-CAD++-O
  • Tipo di licenza:  Single User Licence
  • Requisiti:  See software requirement tab
  • Prezzo:  Per licenza
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Prezzo:  13.808,00 CHF
Descrizione:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Multi-user Licence.
  • Codice prodotto:  ROY-CAD++-O-FLOAT
  • Codice prodotto:  ROY-CAD++-O-FLOAT
  • Tipo di licenza:  Floating Licence
  • Requisiti:  See software requirement tab
  • Prezzo:  Per licenza
M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
ID: M00-694-194-000
Prezzo:  1.120,00 CHF
Descrizione:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Codice prodotto:  M00-694-194-000
  • Filetto:  M5
  • Materiale punta:  Diamante
  • Diametro punta (D):  3
  • Lunghezza (L):  30
Consegna > 25 giorni
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Prezzo:  489,00 CHF
Descrizione:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Codice prodotto:  CALIBRATION SET 12
  • Montaggio:  Montaggio con scanalatura a T
  • Diametro sfera:  30
Tempi di consegna 10-15 Giorni
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Prezzo:  580,00 CHF
Descrizione: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Codice prodotto:  41.00-VE430
  • Materiale:  Fibra di carbonio
  • Lunghezza:  430
  • Diametro:  25 mm
  • Filettatura esterna:  M16x1
Tempi di consegna 10-15 Giorni
Set of Connection Crosses White (5 pc.)
Set of Connection Crosses White (5 pc.)
ID: ART106094
Prezzo:  830,00 CHF
Descrizione: 

Set of connection crosses for DPA White systems.
  • Codice prodotto:  ART106094
  • Codifica:  14 Bit
  • Intervallo di numeri:  476 - 500
  • Tipo di riflettività:  Punto bianco
  • Diametro (D1):  10
Tempi di consegna 10-15 Giorni