text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Stylus Extension 600 mm M5 Carbon Fibre Ø20 mm
ID: 576216
Prezzo:  998,00 €
Descrizione:  Carbon fibre stylus extension with M5 thread, Ø20 mm, length 600 mm. For use with Leica T-Probe.
  • Codice prodotto:  576216
  • Filetto:  M5
  • Diameter Stem (D):  20
  • Materiale stelo:  Fibra di carbonio
  • Lunghezza (L):  600
Esaurito - Presto disponibile
Edge Stylus M5
ID: 576222
Prezzo:  391,00 €
Descrizione:  Edge stylus with M5 thread. For use with Leica T-Probe.
  • Codice prodotto:  576222
  • Filetto:  M5
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
Esaurito - Presto disponibile
M4/M5 Stylus Adaptor
ID: 576228
Prezzo:  68,00 €
Descrizione:  Adaptor for fitting M5-threaded styli to an M4 thread.
  • Codice prodotto:  576228
  • Filetto esterno:  M4
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
Esaurito - Presto disponibile
Punch Tool M5
ID: 576403
Prezzo:  772,00 €
Descrizione:  Punch tool with M5 thread for the Leica T-Probe.
  • Codice prodotto:  576403
  • Filettatura esterna:  M5
Esaurito - Presto disponibile
Reflector Holder 0.5" (OFF-10 SH-0 B-12.7 SS)
ID: 577220
Prezzo:  70,00 €
Descrizione:  Reflector Holder 0.5", Offset 10 mm, Body Ø 12.7 mm, Shankless, Magnetic Base, Stainless Steel.
  • Codice prodotto:  577220
  • Dimensione del riflettore:  0.5"
Esaurito - Presto disponibile
T-Probe Styli Kit
ID: 576231
Prezzo:  4.739,00 €
Descrizione: 

Recommended styli kit for Leica T-Probe.

  • Codice prodotto:  576231
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
Esaurito - Presto disponibile
MAC35 Magnetic Device for MAC34
ID: 576900
Prezzo:  354,00 €
Descrizione: 

MAC35 Magnetic Device for MAC34 T-Probe Stylus Compensation Tool (576899).

  • Codice prodotto:  576900
  • Compatibilità del sistema:  Leica Absolute Tracker AT960
Esaurito - Presto disponibile
Connecting Cable (L = 15 m / 49.2')
ID: 91.30-ST15-W
Prezzo:  134,00 €
Descrizione: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded, drag chain capable with 90°-plug M12/F08 and open wires. Length: 15 m / 49.2'

  • Codice prodotto:  91.30-ST15-W
Esaurito - Presto disponibile
Hollow Taper Shank HSK25 Form E
ID: D16-HSK25E-B
Prezzo:  436,00 €
Descrizione: 

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

  • Codice prodotto:  D16-HSK25E-B
  • Interfaccia:  D16
  • Forma:  E
Esaurito - Presto disponibile
Hollow Taper Shank HSK32 (Thermo-Lock)
ID: D20-HSK32-TI-B
Prezzo:  1.440,00 €
Descrizione: 

Thermal insulated hollow taper shank HSK32 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

  • Codice prodotto:  D20-HSK32-TI-B
  • Interfaccia:  D20
Esaurito - Presto disponibile
Cylindrical Shaft for Tool Holder
ID: D16-D6-L15-B
Prezzo:  235,00 €
Descrizione: 

Cylindrical tool holder for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

  • Codice prodotto:  D16-D6-L15-B
  • Interfaccia:  D16
Esaurito - Presto disponibile
M5-Tool Setter Stylus (TC-24-L6.2)
ID: H00027384
Prezzo:  102,00 €
Descrizione:  Disc stylus made of tungsten carbide Ø24 mm with M5 thread. For measuring non rotating tools with tool setter TS35.30 on machine tools. Previous part number: 35.30-D24
  • Codice prodotto:  H00027384
  • Filetto:  M5
  • Materiale punta:  Carburo di tungsteno
  • Dimensione punta:  Ø24 mm
  • Lunghezza (L):  6.2
Esaurito - Presto disponibile
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  50,00 €
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Codice prodotto:  FX-SPRING
  • Filetto:  Senza filettatura
Esaurito - Presto disponibile
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  33,00 €
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Codice prodotto:  FX-CTSML
  • Filetto:  Senza filettatura
Esaurito - Presto disponibile
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 €
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Codice prodotto:  FV-VEETWIN
Esaurito - Presto disponibile
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.254,00 €
Descrizione:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Codice prodotto:  FV-STARTERKIT
  • Filetto:  M4
  • Applicazione:  Multisensor CMM
Esaurito - Presto disponibile
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  10,00 €
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/15
  • Lunghezza:  15 mm
  • Diametro:  8 mm
Esaurito - Presto disponibile
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prezzo:  1.565,00 €
Descrizione:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Esaurito - Presto disponibile
M4-Stylus (SN-6-CE-4.5-L100)
ID: H00027394
Prezzo:  274,00 €
Descrizione: 

Straight stylus with M4 thread, silicon nitride ball Ø6 mm, ceramic stem Ø4.5 mm, length 100 mm. For use on machine tools. Previous part number: 91.00-T103/6-KE-M4-SI

  • Codice prodotto:  H00027394
  • Filetto:  M4
  • Materiale punta:  Nitruro di silicio
  • Diametro punta (D):  6
  • Lunghezza (L):  100
Esaurito - Presto disponibile
Mounting Hook Wrench
ID: H00047098
Prezzo:  54,00 €
Descrizione: 

Hook wrench for adjusting Absolute Arm base on mounting ring.

  • Codice prodotto:  H00047098
  • Compatibilità:  Adattatore per anello di montaggio da 3,5“ a 4,5” (H00041163), 3.5" and 4.5" pouinting nut
Esaurito - Presto disponibile