text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

168 prodotto/i trovato/i

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Prezzo: 21,00 €

Breve panoramica: The angle block slider enables users to position elements horizontally on the base plate.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prezzo: 18,00 €

Breve panoramica: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 10
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Corner Bracket

ID: FV-CNRBRKT

Prezzo: 50,00 €

Breve panoramica: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

In giacenza - Spedizione in 1-2 giorni

Vee Block Single

ID: FV-VEE

Prezzo: 31,00 €

Breve panoramica: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

In giacenza - Spedizione in 1-2 giorni

Tension Post (M4)

ID: FV-POST

Prezzo: 18,00 €

Breve panoramica: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Prezzo: 580,00 €

Breve panoramica: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Articulated Fixture Arm (M8)

ID: FX-ARM

Prezzo: 138,00 €

Breve panoramica: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Slider Block (M4)

ID: FV-SLIDER

Prezzo: 17,00 €

Breve panoramica: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prezzo: 17,00 €

Breve panoramica: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Lunghezza: 10
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M4)

ID: FV-SPRING

Prezzo: 45,00 €

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Resting Cone (M4)

ID: FV-CONE

Prezzo: 15,00 €

Breve panoramica: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 900,00 €

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio (G): M3

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 910,00 €

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio: M4 / M8

In giacenza - Spedizione in 1-2 giorni

Swift-Fix Tool Kit

ID: FX-TOOLS

Prezzo: 26,00 €

Breve panoramica: The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.

In giacenza - Spedizione in 1-2 giorni

Universal Joint

ID: FX-UNI__JOINT

Prezzo: 92,00 €

Breve panoramica: Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Vee Locator

ID: FX-VEE

Prezzo: 75,00 €

Breve panoramica: The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Toggle Clamp

ID: FX-TOG

Prezzo: 135,00 €

Breve panoramica: Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.