text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

HA-TT-50 Probe Extension TKJ (L = 50 mm)
HA-TT-50 Probe Extension TKJ (L = 50 mm)
ID: 03969360
Prijs:  767,00 CHF
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 50 mm.
  • Codice prodotto:  03969360
  • Collegamento:  TKJ / TKJ
  • Lunghezza (L):  50
  • Materiale:  Alluminio / Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
HA-TM-300 Probe Adapter TKJ/M8 (L = 300 mm)
HA-TM-300 Probe Adapter TKJ/M8 (L = 300 mm)
ID: 03969367
Prijs:  539,00 CHF
Beknopt overzicht:  TKJ to M8 adapter made aluminium and stainless steel with a length of 300 mm
  • Codice prodotto:  03969367
  • Collegamento:  TKJ / M8
  • Lunghezza (L):  300
  • Materiale:  Alluminio / Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Prijs:  173,00 CHF
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.
  • Codice prodotto:  03969486
  • Lunghezza:  110
  • Diametro:  19.5
Levertijd > 25 dagen
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Prijs:  173,00 CHF
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.
  • Codice prodotto:  03969487
  • Lunghezza:  160
  • Diametro:  19.5
Levertijd > 25 dagen
Safety Pin for HR-MP Rack
Safety Pin for HR-MP Rack
ID: 03969488
Prijs:  52,00 CHF
Beknopt overzicht:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Codice prodotto:  03969488
  • Lunghezza:  22
  • Diametro:  8
Levertijd > 25 dagen
HR-SP-60 Rack Extension (L = 60 mm)
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Prijs:  173,00 CHF
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 150 mm. Length 60 mm.
  • Codice prodotto:  03969485
  • Lunghezza:  60
  • Diametro:  19.5
Levertijd > 25 dagen
Cleaning Putty
Cleaning Putty
ID: 03969650
Prijs:  18,00 CHF
Beknopt overzicht:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
  • Codice prodotto:  03969650
Op voorraad - verzending 1-2 dagen
Ceramic Calibration Sphere (D = 15 mm)
Ceramic Calibration Sphere (D = 15 mm)
ID: C55918028
Prijs:  336,00 CHF
Beknopt overzicht: 

Ceramic calibration sphere (Ø 15 mm) with M8 thread for use on CMMs.
  • Codice prodotto:  C55918028
  • Materiale sfera:  Ceramica
  • Diametro sfera (D):  15
Levertijd 10-15 dagen
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Prijs:  492,00 CHF
Beknopt overzicht: 

Ceramic calibration sphere (Ø 25 mm) with M8 thread for use on CMMs.
  • Codice prodotto:  C55918029
  • Materiale sfera:  Ceramica
  • Diametro sfera (D):  25
  • Filettatura esterna:  M8
Levertijd > 25 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  1.220,00 CHF
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prijs:  1.318,00 CHF
Beknopt overzicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prijs:  3.715,00 CHF
Beknopt overzicht:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-240AL3
  • Diametro esterno griffe (D1):  240
  • Campo di serraggio esterno (A):  1 - 288
  • Campo di serraggio interno (I):  35 - 295
  • Materiale:  Alluminio
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1.565,00 CHF
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prijs:  1.420,00 CHF
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160SS3-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio esterno (A):  1 - 150
  • Campo di serraggio interno (I):  34 - 174
  • Materiale:  Acciaio inossidabile
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prijs:  1.140,00 CHF
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125AL6-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio:  5 - 156
  • Materiale:  Alluminio
  • Serrraggio (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prijs:  1.490,00 CHF
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-160AL6-NF
  • Diametro esterno griffe (D1):  160
  • Campo di serraggio:  5 - 196
  • Materiale:  Alluminio
  • Serrraggio (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prijs:  1.140,00 CHF
Beknopt overzicht: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Codice prodotto:  FC-125SS3-NF
  • Diametro esterno griffe (D1):  125
  • Campo di serraggio esterno (A):  1 - 126
  • Campo di serraggio interno (I):  32 - 122
  • Materiale:  Acciaio inossidabile
Levertijd 10-15 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  zł 1.200,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Codice prodotto:  FV-GUIDE480
  • Compatibilità piastra di fissaggio:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  zł 43,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Codice prodotto:  FV-SO8/20
  • Lunghezza:  20 mm
  • Diametro:  8 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  zł 8.407,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Codice prodotto:  FX-BP400/600
  • Filetto:  M8
Op voorraad - verzending 1-2 dagen