text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo

Catalogo

Temperature Sensor (L = 150 mm)
Temperature Sensor (L = 150 mm)
ID: H00027389
Prezzo:  447,00 CHF
Breve panoramica:  Temperature sensor (L = 150 mm) for use on temperature probes for machine tools. Previous part number: 44.00-T150
  • Previous Part Number:  44.00-T150
  • Compatibilità:  IRP25.50-TP , RWP20.50-G-TP, RWP20.50-M-TP
  • Lunghezza:  150mm
  • Diametro:  12mm
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prezzo:  465,00 CHF
Breve panoramica:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lunghezza:  150mm
  • Diametro:  25mm
  • External Thread:  M16x1
In giacenza - Spedizione in 1-2 giorni
M4-Clamp Adapter (AA-18-L9)
M4-Clamp Adapter (AA-18-L9)
ID: H00027438
Prezzo:  78,00 CHF
Breve panoramica:  Measuring unit clamp adapter made of anodised aluminium for holding up to 4x M4 styli in different angles (1x 0°, 1x 45°, 2x 90°). For use on machine tools. Previous part number: 41.00-KM-M4
  • Previous Part Number:  41.00-KM-M4
  • Diametro (D):  18mm
  • Lunghezza (L):  9mm
  • Materiale:  Alluminio anodizzato
In giacenza - Spedizione in 1-2 giorni
C-Spanner
C-Spanner
ID: 2951
Prezzo:  6,00 CHF
Breve panoramica:  C-Spanner for the exchange of measuring units on probes for machine tools.
  • Materiale:  Tempered Steel
  • Lunghezza:  136mm
In giacenza - Spedizione in 1-2 giorni
Dial Gauge (Analogue)
Dial Gauge (Analogue)
ID: 3079
Prezzo:  198,00 CHF
Breve panoramica:  Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
  • Measurement Technology:  Analogue
  • Measuring Unit:  mm
  • Measurement Range:  0.2 mm
  • Reading:  0.002 mm
  • Diametro punta:  2mm
In giacenza - Spedizione in 1-2 giorni
BS-Tool Setter Stylus (TC-13-L15)
BS-Tool Setter Stylus (TC-13-L15)
ID: H00027357
Prezzo:  164,00 CHF
Breve panoramica:  Disc stylus made of tungsten carbide Ø13 mm with break shaft connection. For measuring rotating tools with tool setters on machine tools. Previous part number: 91.00-D13/24.5
  • Filetto / Collegamento:  Break Shaft
  • Materiale punta:  Carburo di tungsteno
  • Diametro punta (D):  13mm
  • Lunghezza (L):  15mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prezzo:  7.475,00 CHF
Breve panoramica:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  900,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 CHF
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 CHF
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
In giacenza - Spedizione in 1-2 giorni
Web based Training - Drawings - 1 day
Web based Training - Drawings - 1 day
ID: RE54T153-00039
Prezzo:  494,50 CHF
Breve panoramica: 

Target Group
Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required other than computer literacy.
Other Information
To complete the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
NON APPLICABILE
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
ID: ROY-CAD**-O
Prezzo:  12.900,00 CHF
Breve panoramica:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Single User Licence.
  • Codice prodotto:  ROY-CAD++-O
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
NON APPLICABILE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Prezzo:  14.800,00 CHF
Breve panoramica:  PC-DMIS Offline enables fast, convenient measurement routine programming and simulation in a fully featured virtual environment. Multi-user Licence.
  • Codice prodotto:  ROY-CAD++-O-FLOAT
  • Tipo di licenza:  Lizenz flottante
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
NON APPLICABILE
Absolute Tracker Lanyard Set 1 (full)
Absolute Tracker Lanyard Set 1 (full)
ID: 576104
Prezzo:  141,00 CHF
Breve panoramica:  Absolute Tracker Lanyard Set 1 (full).
  • Dimensione del riflettore:  1.5"
In giacenza - Spedizione in 1-2 giorni
Inspire
Inspire
ID: SA2-INS-1
Prezzo:  13.742,50 CHF
Breve panoramica:  Inspire Portable Metrology software.
Includes: All hardware interfaces, Supports IGES, STEP, STL, CATIA, Solidworks, NX, ProEngineer, Inventor, and Parametric CAD import. Training class available at additional cost, and updates for 1 year. Inspire provided with license code.
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
NON APPLICABILE
Inspire - Annual Maintenance Agreement (SMA)
Inspire - Annual Maintenance Agreement (SMA)
ID: SA2-INS-SMA-1
Prezzo:  2.415,00 CHF
Breve panoramica:  Inspire single seat license annual software maintenance agreement after 12 months.
  • Tipo di licenza:  Software Maintenance Agreement (SMA)
  • Prezzo:  Per licenza
NON APPLICABILE
Inspire Probe
Inspire Probe
ID: SA2-INS-PRB
Prezzo:  7.992,50 CHF
Breve panoramica:  Inspire Portable Metrology software for portable probing devices only.
Includes: All hardware interfaces, supports IGES, STEP, STL, CATIA, Solidworks, NX, ProEngineer, Inventor and Parametric CAD import. Training class available at additional cost, and updates for 1 year. Inspire provided with license code.
  • Tipo di licenza:  Single User Licence
  • Requisiti:  Consulte la pestaña Requisitos de software
  • Prezzo:  Per licenza
NON APPLICABILE
Web based Training - GD&T - 1,5 day
Web based Training - GD&T - 1,5 day
ID: RE54T153-00032
Prezzo: 
Breve panoramica: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet. 

For more information: Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
NON APPLICABILE
M5-Stylus (SN-4-TC-2.5-L80)
M5-Stylus (SN-4-TC-2.5-L80)
ID: M00-694-133-000
Prezzo:  107,00 CHF
Breve panoramica:  Straight stylus with M5 thread, silicon nitride ball Ø4 mm, tungsten carbide stem Ø2.5 mm, length 80 mm. For use on coordinate measuring machines (CMM).
  • Filetto / Collegamento:  M5
  • Materiale punta:  Nitruro di silicio
  • Diametro punta (D):  4mm
  • Classe sfera:  G5
  • Lunghezza (L):  80mm
In giacenza - Spedizione in 1-2 giorni
Inspire Probe - Annual Maintenance Agreement (SMA)
Inspire Probe - Annual Maintenance Agreement (SMA)
ID: SA2-INS-SMA-PRB
Prezzo:  1.610,00 CHF
Breve panoramica:  Inspire for probing devices only single seat license annual software maintenance agreement after 12 months.
  • Tipo di licenza:  Software Maintenance Agreement (SMA)
  • Prezzo:  Per licenza
NON APPLICABILE