text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

Attrezzaggi

94 prodotto/i trovato/i

ID: FV-SLIDE

Prezzo: 1.806,00 zł

Breve panoramica: Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Prezzo: 2.451,00 zł

Breve panoramica: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Codice prodotto: FV-BP200/200C
Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Prezzo: 95,00 zł

Breve panoramica: The angle block slider enables users to position elements horizontally on the base plate.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prezzo: 82,00 zł

Breve panoramica: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 10mm
Diametro: 8mm

In giacenza - Spedizione in 1-2 giorni

Corner Bracket

ID: FV-CNRBRKT

Prezzo: 224,00 zł

Breve panoramica: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

In giacenza - Spedizione in 1-2 giorni

Tension Post (M4)

ID: FV-POST

Prezzo: 82,00 zł

Breve panoramica: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Prezzo: 2.580,00 zł

Breve panoramica: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Slider Block (M4)

ID: FV-SLIDER

Prezzo: 77,00 zł

Breve panoramica: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prezzo: 77,00 zł

Breve panoramica: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Lunghezza: 10mm
Diametro: 8mm

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M4)

ID: FV-SPRING

Prezzo: 198,00 zł

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Resting Cone (M4)

ID: FV-CONE

Prezzo: 65,00 zł

Breve panoramica: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 3.999,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70mm
Campo di serraggio esterno (A): 1 - 71mm
Campo di serraggio interno (I): 18 - 66mm
Materiale: Acciaio inossidabile
Serrraggio (G): M3

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 4.042,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70mm
Campo di serraggio esterno (A): 1 - 71mm
Campo di serraggio interno (I): 18 - 66mm
Materiale: Acciaio inossidabile
Serrraggio: M4 / M8

In giacenza - Spedizione in 1-2 giorni

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prezzo: 232,00 zł

Breve panoramica: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lunghezza: 20mm
Diametro: 16mm

In giacenza - Spedizione in 1-2 giorni

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Prezzo: 4.343,00 zł

Breve panoramica: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetto / Collegamento: M8
Applicazione: CMM, Bracci di misura portatili

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x150mm

ID: FX-PR30__150

Prezzo: 185,00 zł

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 150mm

In giacenza - Spedizione in 1-2 giorni

Tension Post (M8)

ID: FX-POST

Prezzo: 116,00 zł

Breve panoramica: This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 20 mm / L = 30 mm)

ID: FX-SO20__30

Prezzo: 77,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.