text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

Catalogus

1.321 product(en) gevonden

ID: H00000383-09

Prijs: 510,00 CHF

Beknopt overzicht: 85 mm carbon probe with glue-mounted stainless steel ball Ø25 mm. For use with all Absolute Arm models.

Diametro punta: 25
Lunghezza: 85
Attacco sensore: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-15-C-75)

ID: H00000383-05

Prijs: 510,00 CHF

Beknopt overzicht: 75 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.

Diametro punta: 15
Lunghezza: 75
Attacco sensore: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-12.7-C-85)

ID: H00000383-07

Prijs: 510,00 CHF

Beknopt overzicht: 85 mm carbon probe with glue-mounted stainless steel ball Ø12.7 mm. For use with all Absolute Arm models.

Diametro punta: 12.7
Lunghezza: 85
Attacco sensore: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-9.5-C-50)

ID: H00000383-01

Prijs: 510,00 CHF

Beknopt overzicht: 50 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.

Diametro punta: 9.5
Lunghezza: 50
Attacco sensore: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Resting Cone (M8)

ID: FX-CONE

Prijs: 22,00 CHF

Beknopt overzicht: The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Prijs: 570,00 CHF

Beknopt overzicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Codice prodotto: FV-AB190/200F
Filetto / Collegamento: M4
Previous Part Number: FV-AB180/200F

Op voorraad – Verzendtijd 1-2 dagen

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Prijs: 22,00 CHF

Beknopt overzicht: The angle block slider enables users to position elements horizontally on the base plate.

Filetto / Collegamento: M4

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 500x500x12mm (M8)

ID: FX-BP500__500

Prijs: 1.520,00 CHF

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 600x600x12mm (M8)

ID: FX-BP600__600

Prijs: 1.900,00 CHF

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prijs: 19,00 CHF

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 10
Diametro: 8

Op voorraad – Verzendtijd 1-2 dagen

Corner Bracket

ID: FV-CNRBRKT

Prijs: 52,00 CHF

Beknopt overzicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Universal Clamp (M8)

ID: FX-CLAMP

Prijs: 129,00 CHF

Beknopt overzicht: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Single

ID: FV-VEE

Prijs: 32,00 CHF

Beknopt overzicht: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

Op voorraad – Verzendtijd 1-2 dagen

Tension Post (M4)

ID: FV-POST

Prijs: 19,00 CHF

Beknopt overzicht: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Filetto / Collegamento: M4

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Basic Kit

ID: FX-BASIC__KIT

Prijs: 475,00 CHF

Beknopt overzicht: The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.

Filetto / Collegamento: M8
Applicazione: CMM, Bracci di misura portatili

Op voorraad – Verzendtijd 1-2 dagen

M5-Stylus (R-0.5-TC-0.4/0.7-L30) - Stepped

ID: M00-1121-055-000

Prijs: 86,00 CHF

Beknopt overzicht: Straight stylus with M5 thread, ruby ball Ø0.5 mm, stepped tungsten carbide stem Ø0.4/0.7 mm, length 30 mm. For use on coordinate measuring machines (CMM).