text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo

Catalogo

Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prezzo:  8.170,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  82,00 zł
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  224,00 zł
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Prezzo:  555,00 zł
Breve panoramica:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Vee Block Single
Vee Block Single
ID: FV-VEE
Prezzo:  138,00 zł
Breve panoramica:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In giacenza - Spedizione in 1-2 giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  82,00 zł
Breve panoramica:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prezzo:  2.043,00 zł
Breve panoramica:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  2.580,00 zł
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  611,00 zł
Breve panoramica:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  77,00 zł
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  77,00 zł
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  198,00 zł
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  65,00 zł
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  3.999,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  4.042,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
M4-Stylus Extension (SS-7-L40)
M4-Stylus Extension (SS-7-L40)
ID: H00027414
Prezzo:  151,00 zł
Breve panoramica:  Stylus extension with M4 thread, stainless steel stem Ø7 mm, length 40 mm. For use on machine tools. Previous part number: 91.00-TV40-ST-M4-D7
  • Filetto / Collegamento:  M4
  • Previous Part Number:  91.00-TV40-ST-M4-D7
  • Diameter Stem (D):  7
  • Materiale stelo:  Acciaio inossidabile
  • Lunghezza (L):  40
In giacenza - Spedizione in 1-2 giorni
M4-Stylus Extension (SS-7-L10)
M4-Stylus Extension (SS-7-L10)
ID: H00027383
Prezzo:  56,00 zł
Breve panoramica:  Stylus extension with M4 thread, stainless steel stem Ø7 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-TV10-ST-M4-D7
  • Filetto / Collegamento:  M4
  • Previous Part Number:  91.00-TV10-ST-M4-D7
  • Diameter Stem (D):  7
  • Materiale stelo:  Acciaio inossidabile
  • Lunghezza (L):  10
In giacenza - Spedizione in 1-2 giorni
M3-Cylindrical Stylus (AA-30-SS-5.5-L36.5)
M3-Cylindrical Stylus (AA-30-SS-5.5-L36.5)
ID: H00027377
Prezzo:  839,00 zł
Breve panoramica:  Cylindrical stylus with M3 thread, made of anodised aluminium Ø30 mm, stainless steel stem with predefined break point, length 36.5 mm. For use on machine tools. Previous part number: 21.00-T36.5/30-M3
  • Previous Part Number:  21.00-T36.5/30-M3
  • Filetto / Collegamento:  M3
  • Materiale punta:  Alluminio anodizzato
  • Diametro punta (D):  30
  • Lunghezza (L):  36.5
In giacenza - Spedizione in 1-2 giorni
M4-Stylus Extension (SS-7-L20)
M4-Stylus Extension (SS-7-L20)
ID: H00027370
Prezzo:  56,00 zł
Breve panoramica:  Stylus extension with M4 thread, stainless steel stem Ø7 mm, length 20 mm. For use on machine tools. Previous part number: 91.00-TV20-ST-M4-D7
  • Filetto / Collegamento:  M4
  • Previous Part Number:  91.00-TV20-ST-M4-D7
  • Diameter Stem (D):  7
  • Materiale stelo:  Acciaio inossidabile
  • Lunghezza (L):  20
In giacenza - Spedizione in 1-2 giorni
M4-Tool Setter Stylus (TC-37-CE-6-L16)
M4-Tool Setter Stylus (TC-37-CE-6-L16)
ID: H00027373
Prezzo:  1.303,00 zł
Breve panoramica:  Disc stylus made of tungsten carbide Ø37 mm with M4 thread and break shaft made of ceramic. For use on tool setters. Previous part number: 35.10-D37/16-M4
  • Previous Part Number:  35.10-D37/16-M4
  • Filetto / Collegamento:  M4
  • Materiale punta:  Carburo di tungsteno
  • Diametro punta (D):  37
  • Lunghezza (L):  16
In giacenza - Spedizione in 1-2 giorni