text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prezzo:  6.500,00 €
Breve panoramica:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 €
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 €
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
In giacenza - Spedizione in 1-2 giorni
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
ID: G39031401
Prezzo: 
Breve panoramica: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  884,00 €
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  31,00 €
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  42,00 €
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prezzo:  979,00 €
Breve panoramica:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
In giacenza - Spedizione in 1-2 giorni
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  59,00 €
Breve panoramica:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Lunghezza:  50mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  17,00 €
Breve panoramica:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  17,00 €
Breve panoramica:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prezzo:  20,00 €
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  25mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prezzo:  CHF24.00
Breve panoramica:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prezzo:  44,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 200mm
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.800,00 CHF
Breve panoramica:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M4
  • Applicazione:  Multisensor CMM
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prezzo:  2.442,00 CHF
Breve panoramica:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
In giacenza - Spedizione in 1-2 giorni
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Prezzo:  251,00 CHF
Breve panoramica:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  20,00 CHF
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  20mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Prezzo:  1.621,00 CHF
Breve panoramica:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
In giacenza - Spedizione in 1-2 giorni
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Prezzo:  107,00 CHF
Breve panoramica:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni