text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET
SWIFT-SET
SKU: GB-0122-1000
Price:  6.500,00 €
Quick overview:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Stock goods
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Price:  550,00 €
Quick overview:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60
Stock goods
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Price:  471,00 €
Quick overview:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40
Stock goods
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
SKU: FC-70SS3-NF
Price:  900,00 €
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Stock goods
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
SKU: FC-70SS3
Price:  910,00 €
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Stock goods
Thumb Screw M8
Thumb Screw M8
SKU: FX-THUMB
Price:  10,00 €
Quick overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
Stock goods
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
SKU: FX-SUB45__120
Price:  58,00 €
Quick overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Dimensione:  120 x 45 x 12 mm
Stock goods
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
SKU: FX-STARTER__KIT
Price:  1.160,00 €
Quick overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Stock goods
Support Stop
Support Stop
SKU: FX-SUP__STOP
Price:  84,00 €
Quick overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetto / Collegamento:  M8
Stock goods
Toggle Clamp
Toggle Clamp
SKU: FX-TOG
Price:  135,00 €
Quick overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Filetto / Collegamento:  M8
Stock goods
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Price:  900,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Stock goods
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
Price:  32,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Stock goods
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Price:  46,00 €
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Stock goods
Spring Clamp (M8)
Spring Clamp (M8)
SKU: FX-SPRING
Price:  49,00 €
Quick overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Stock goods
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
Price:  17,00 €
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  16
Stock goods
Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  82,00 €
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Stock goods
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  32,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Price:  750,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Stock goods
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
SKU: FX-SO16__100
Price:  25,00 €
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100
  • Diametro:  16
Stock goods
Spring Nut (M8)
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  32,00 €
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Stock goods