text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
N° : KPP-300__300
Prix:  2.227,50 zł
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilità piastra di fissaggio:  KB-250/250, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  3.978,00 zł
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
N° : KPP-500__500
Prix:  3.411,00 zł
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilità piastra di fissaggio:  KB-400/400, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  139,50 zł
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Locator
Vee Locator
N° : FV-FEMALE
Prix:  112,50 zł
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  189,00 zł
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
Spring Clamp (M8)
N° : FX-SPRING
Prix:  216,00 zł
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
Thumb Screw M8
N° : FX-THUMB
Prix:  40,50 zł
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
En stock - Livraison sous 1 à 2 jours
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
N° : FV-GUIDE480
Prix:  1.062,00 zł
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  40,50 zł
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  63,00 zł
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  72,00 zł
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  16mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  211,50 zł
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
N° : FX-CTMED
Prix:  13 361,00 zł
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  299 545,00 zł
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  9 913,00 zł
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100mm
  • Diametro:  16mm
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  13 361,00 zł
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
N° : FX-SUB45__120
Prix:  23 274,00 zł
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Dimensione:  120 x 45 x 12 mmmm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  471 945,00 zł
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
En stock - Livraison sous 1 à 2 jours
Support Stop
Support Stop
N° : FX-SUP__STOP
Prix:  35 773,00 zł
Vue d'ensemble sommaire:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetto / Collegamento:  M8
En stock - Livraison sous 1 à 2 jours