Quick overview: Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=10 mm and D2=13 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=20 mm and D2=27 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. Easily removable after adhering to the workpiece.
Quick overview: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=3 mm and D2=5 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=10 mm and D2=13 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=2 mm and D2=3.5 mm. Easily removable after adhering to the workpiece.
Quick overview: Set consisting of 1000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=15 mm and D2=20 mm. For permanently adhering to the workpiece.
Quick overview: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
Quick overview: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
