text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue

Catalogue

Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
N° : FX-ARM
Prix:  83,00 €
Vue d'ensemble sommaire:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetto / Collegamento:  M8
En stock - Livraison sous 1 à 2 jours
Slider Block (M4)
Slider Block (M4)
N° : FV-SLIDER
Prix:  15,00 €
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
En stock - Livraison sous 1 à 2 jours
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
N° : FV-SO__MAG
Prix:  14,00 €
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10mm
  • Diametro:  8mm
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M4)
Spring Clamp (M4)
N° : FV-SPRING
Prix:  44,00 €
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
Resting Cone (M4)
N° : FV-CONE
Prix:  13,00 €
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  890,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  900,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Taper Shank JIS BT40
Taper Shank JIS BT40
N° : D28-BT40-A__B
Prix:  235,00 €
Vue d'ensemble sommaire: 

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK63 Form A
Hollow Taper Shank HSK63 Form A
N° : D28-HSK63A-M
Prix:  353,00 €
Vue d'ensemble sommaire: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
N° : D28-D32-L100-B
Prix:  353,00 €
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
N° : D28-HSK63F-B
Prix:  353,00 €
Vue d'ensemble sommaire: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK50 Form E
Hollow Taper Shank HSK50 Form E
N° : D28-HSK50E-M
Prix:  460,00 €
Vue d'ensemble sommaire: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
N° : D28-HSK100A-W
Prix:  418,60 CHF
Vue d'ensemble sommaire: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
En stock - Livraison sous 1 à 2 jours
Modular Adapter D20/D28
Modular Adapter D20/D28
N° : D20-MO-B
Prix:  98,90 CHF
Vue d'ensemble sommaire: 

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK50
Hollow Taper Shank HSK50
N° : D20-HSK50-TI-B
Prix:  1 340,90 CHF
Vue d'ensemble sommaire: 

Thermal insulated hollow taper shank HSK50 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  31,00 CHF
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
N° : D28-SK50-A__B
Prix:  270,25 CHF
Vue d'ensemble sommaire: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Standoff Support (M8)
Standoff Support (M8)
N° : FX-SO__SUPP
Prix:  20,00 CHF
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  10mm
  • Diametro:  15mm
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK40 Form E
Hollow Taper Shank HSK40 Form E
N° : D20-HSK40E-B
Prix:  282,90 CHF
Vue d'ensemble sommaire: 

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Target D1=20 mm white uncoded (5000 pc.) (R)
Target D1=20 mm white uncoded (5000 pc.) (R)
N° : ART107146
Prix:  620,00 CHF
Vue d'ensemble sommaire:  Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. Easily removable after adhering to the workpiece.
  • Codifica:  Non codificato
  • Tipo di riflettività:  Punto bianco
  • Diametro (D1):  20mm
  • Diametro (D2):  27mm
  • Adesivo:  Removibile (R)
En stock - Livraison sous 1 à 2 jours