text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

168 prodotto/i trovato/i

ID: FV-SO__PIN

Prezzo: 5.603,00 zł

Breve panoramica: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 10
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Corner Bracket

ID: FV-CNRBRKT

Prezzo: 21.119,00 zł

Breve panoramica: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

In giacenza - Spedizione in 1-2 giorni

Vee Block Single

ID: FV-VEE

Prezzo: 12.499,00 zł

Breve panoramica: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

In giacenza - Spedizione in 1-2 giorni

Tension Post (M4)

ID: FV-POST

Prezzo: 6.465,00 zł

Breve panoramica: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Prezzo: 145.247,00 zł

Breve panoramica: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Articulated Fixture Arm (M8)

ID: FX-ARM

Prezzo: 35.773,00 zł

Breve panoramica: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Slider Block (M4)

ID: FV-SLIDER

Prezzo: 6.465,00 zł

Breve panoramica: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prezzo: 6.034,00 zł

Breve panoramica: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Lunghezza: 10
Diametro: 8

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M4)

ID: FV-SPRING

Prezzo: 18.964,00 zł

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

Resting Cone (M4)

ID: FV-CONE

Prezzo: 5.603,00 zł

Breve panoramica: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetto / Collegamento: M4

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 383.590,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio (G): M3

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 387.900,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio: M4 / M8

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prezzo: 381.004,00 zł

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prezzo: 13.361,00 zł

Breve panoramica: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Spring Clamp (M8)

ID: FX-SPRING

Prezzo: 20.688,00 zł

Breve panoramica: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Thumb Screw M8

ID: FX-THUMB

Prezzo: 3.879,00 zł

Breve panoramica: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prezzo: 6.896,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.