Catalogo

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 10 m / 32.8'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1,000 pieces

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm,  outer diameter: 25 mm. Quantity: 300 pieces

Li-Ion Battery 22.2 V / 3200 mAh for FREEBOX-II.

Magnetic, retro-reflective non-coded targets for magnetic adhering to the workpiece. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 8 pieces

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"