Gyors áttekintés: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Gyors áttekintés: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
Gyors áttekintés: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Gyors áttekintés: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Gyors áttekintés: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
Gyors áttekintés: The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
Gyors áttekintés: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
Gyors áttekintés: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
Gyors áttekintés: Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
Gyors áttekintés: Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. For permanently adhering to the workpiece.
Gyors áttekintés: Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. Easily removable after adhering to the workpiece.
Gyors áttekintés: Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
