text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FV-SLIDE
Ár:  370,00 £
Gyors áttekintés:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FC-70SS3-NF
Ár:  818,00 £
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-SLIDER
Ár:  15,00 £
Gyors áttekintés:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SPRING
Ár:  45,00 £
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO20__50
Ár:  16,00 £
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  50mm
  • Átmérő:  20mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-CONE
Ár:  19,00 £
Gyors áttekintés:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-BP600__600
Ár:  1 673,00 £
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-STARTER__KIT
Ár:  1 055,00 £
Gyors áttekintés:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-BP300__300
Ár:  682,00 £
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-HEIGHT
Ár:  55,00 £
Gyors áttekintés:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Hosszúság:  50mm
  • Átmérő:  16mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-KINKITPLUS
Ár:  242,00 £
Gyors áttekintés:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO20__20
Ár:  15,00 £
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  20mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-M8SPRGNUT
Ár:  29,00 £
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-ARM
Ár:  125,00 £
Gyors áttekintés:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO__PIN
Ár:  19,00 £
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Hosszúság:  25mm
  • Átmérő:  16mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-THUMB
Ár:  9,00 £
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-UNI__JOINT
Ár:  84,00 £
Gyors áttekintés:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: KB-250__250
Ár:  582,00 £
Gyors áttekintés:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Lemez kompatibilitás:  KPP-300/300, KPT-300/300
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: KB-UNIVL
Ár:  609,00 £
Gyors áttekintés:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Lemez kompatibilitás:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: KPT-400__400
Ár:  1 291,00 £
Gyors áttekintés:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Lemez kompatibilitás:  KB-300/300, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül