text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  82,00 zł
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Hosszúság:  10
  • Átmérő:  8
In Stock
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  224,00 zł
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In Stock
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  138,00 zł
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In Stock
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  82,00 zł
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Menet:  M4
In Stock
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  2 043,00 zł
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
In Stock
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  2 580,00 zł
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Menet:  M4
In Stock
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  611,00 zł
Resumen:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
In Stock
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  77,00 zł
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
In Stock
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  77,00 zł
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10
  • Átmérő:  8
In Stock
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  198,00 zł
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Menet:  M4
In Stock
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  65,00 zł
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M4
In Stock
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  3 999,00 zł
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
In Stock
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  4 042,00 zł
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
In Stock
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  3 999,00 zł
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
In Stock
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  142,00 zł
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In Stock
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  215,00 zł
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  43,00 zł
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Menet:  M8
In Stock
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  77,00 zł
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20
  • Átmérő:  16
In Stock
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  361,00 zł
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  142,00 zł
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In Stock