Zum Inhalt springen Zum Navigationsmenü springen

Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen

Katalog

1.323 Artikel gefunden

ID: FX-BP500__500

Preis: 6.536,00 zł

Schnellübersicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Menet: M8

Auf Lager – Versand 1–2 Tage

Fixture Baseplate 600x600x12mm (M8)

ID: FX-BP600__600

Preis: 8.170,00 zł

Menet: M8

Auf Lager – Versand 1–2 Tage

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Preis: 82,00 zł

Schnellübersicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Hosszúság: 10
Átmérő: 8

Auf Lager – Versand 1–2 Tage

Corner Bracket

ID: FV-CNRBRKT

Preis: 224,00 zł

Schnellübersicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Auf Lager – Versand 1–2 Tage

Universal Clamp (M8)

ID: FX-CLAMP

Preis: 555,00 zł

Schnellübersicht: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Menet: M8

Auf Lager – Versand 1–2 Tage

Vee Block Single

ID: FV-VEE

Preis: 138,00 zł

Schnellübersicht: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

Auf Lager – Versand 1–2 Tage

Tension Post (M4)

ID: FV-POST

Preis: 82,00 zł

Schnellübersicht: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Menet: M4

Auf Lager – Versand 1–2 Tage

Swift-Fix - Basic Kit

ID: FX-BASIC__KIT

Preis: 2.043,00 zł

Schnellübersicht: The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.

Menet: M8
Alkalmazás: CMM, Hordozható mérőkar

Auf Lager – Versand 1–2 Tage

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Preis: 2.580,00 zł

Schnellübersicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Menet: M4

Auf Lager – Versand 1–2 Tage

Articulated Fixture Arm (M8)

ID: FX-ARM

Preis: 611,00 zł

Schnellübersicht: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Menet: M8

Auf Lager – Versand 1–2 Tage

Slider Block (M4)

ID: FV-SLIDER

Preis: 77,00 zł

Schnellübersicht: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Menet: M4

Auf Lager – Versand 1–2 Tage

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Preis: 77,00 zł

Schnellübersicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Hosszúság: 10
Átmérő: 8

Auf Lager – Versand 1–2 Tage

Spring Clamp (M4)

ID: FV-SPRING

Preis: 198,00 zł

Schnellübersicht: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Menet: M4

Auf Lager – Versand 1–2 Tage

Resting Cone (M4)

ID: FV-CONE

Preis: 65,00 zł

Schnellübersicht: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Menet: M4

Auf Lager – Versand 1–2 Tage

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Preis: 3.999,00 zł

Schnellübersicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Befogó tokmány külső átmérője (D1): 70
Külső befogási tartomány (A): 1 - 71
Belső befogási tartomány (I): 18 - 66
Anyag: Rozsdamentes acél
Rögzítés (G): M3

Auf Lager – Versand 1–2 Tage

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Preis: 4.042,00 zł

Schnellübersicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Befogó tokmány külső átmérője (D1): 70
Külső befogási tartomány (A): 1 - 71
Belső befogási tartomány (I): 18 - 66
Anyag: Rozsdamentes acél
Rögzítés: M4 / M8

Auf Lager – Versand 1–2 Tage

Analogue Dial Gauge, Ø40, 5 mm, 0.01 mm

ID: 01419047

Preis: 503,00 zł

Schnellübersicht: Analogue dial gauge Ø 40 mm, protection class IP40. With rotating dial and adjustable tolerance marks. Resolution 0.01 mm / Measuring range: 5 mm