Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM

CMM

HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Price:  173,00 CHF
Quick Overview:  110 mm support pillar for a total height of 200 mm
  • Hosszúság:  110
  • Átmérő:  19.5
In Stock - Despatched 1-2 Days
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Price:  173,00 CHF
Quick Overview:  160 mm support pillar for a total height of 250 mm
  • Hosszúság:  160
  • Átmérő:  19.5
In Stock - Despatched 1-2 Days
Safety Pin for HR-MP Rack
Safety Pin for HR-MP Rack
ID: 03969488
Price:  52,00 CHF
Quick Overview:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Hosszúság:  22
  • Átmérő:  8
In Stock - Despatched 1-2 Days
HR-SP-60 Rack Extension (L = 60 mm)
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Price:  173,00 CHF
Quick Overview:  60 mm support pillar for a total height of 150 mm.
  • Hosszúság:  60
  • Átmérő:  19.5
In Stock - Despatched 1-2 Days
Cleaning Putty
Cleaning Putty
ID: 03969650
Price:  18,00 CHF
Quick Overview:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
In Stock - Despatched 1-2 Days
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Price:  492,00 CHF
Quick Overview: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Price:  930,00 CHF
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Price:  940,00 CHF
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  50,00 CHF
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Price:  10,00 CHF
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Menet:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  18,00 CHF
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20
  • Átmérő:  16
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  84,00 CHF
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  26,00 CHF
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  100
  • Átmérő:  16
In Stock - Despatched 1-2 Days
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  zł142.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In Stock - Despatched 1-2 Days
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Price:  zł258.00
Quick Overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Méret:  120 x 45 x 12 mm
In Stock - Despatched 1-2 Days
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Price:  €1,160.00
Quick Overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
In Stock - Despatched 1-2 Days
Support Stop
Support Stop
ID: FX-SUP__STOP
Price:  €84.00
Quick Overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Menet:  M8
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Price:  €52.00
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Hosszúság:  20
  • Átmérő:  16
In Stock - Despatched 1-2 Days
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Price:  €42.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Méret:  30 x 30 x 150
In Stock - Despatched 1-2 Days
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Price:  €26.00
Quick Overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Menet:  M8
In Stock - Despatched 1-2 Days