Katalógus

Typical 1D manual height gauge integrating essential functions required for on-the-fly measurements and instant access to results. Measuring Range: 715 mm / 28 in

Magnetic, retro-reflective non-coded targets for magnetic adhering to the workpiece. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 8 pcs.

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use of CMMs.

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and an extension (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Dial gauge with housing Ø44 mm and display with reading 0.5 - 0 - 0.5 (mm). Protection class IP65. Resolution: 0.001 mm / .00005", Measuring range: ±0.5 mm / ±.010" 

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Taper shank CAT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection. Adapter Ø: 50 mm / 1.97"