text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FC-70SS3-NF
Ár:  890,00 CHF
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-SLIDER
Ár:  15,00 CHF
Gyors áttekintés:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-KINKIT
Ár:  251,00 CHF
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-CAPM8__20
Ár:  17,00 CHF
Gyors áttekintés:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-CTMED
Ár:  31,00 CHF
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SPRING
Ár:  48,00 CHF
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-GUIDE480
Ár:  236,00 CHF
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Lemez kompatibilitás:  FV-200-200C, FV-200/200F, FV-200/200P
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-CLAMP
Ár:  107,00 CHF
Gyors áttekintés:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30HINGE
Ár:  47,00 CHF
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PILLAR__KIT
Ár:  979,00 CHF
Gyors áttekintés:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SILVER__KIT
Ár:  1 621,00 CHF
Gyors áttekintés:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-SO8__25
Ár:  9,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  25mm
  • Átmérő:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-CONEADJ
Ár:  14,00 CHF
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-POST
Ár:  15,00 CHF
Gyors áttekintés:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül