text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

Catalogus

1.296 product(en) gevonden

ID: FX-BP600__600

Prijs: 1 821,00 CHF

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Menet: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prijs: 13,00 CHF

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Hosszúság: 10mm
Átmérő: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Corner Bracket

ID: FV-CNRBRKT

Prijs: 49,00 CHF

Beknopt overzicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Universal Clamp (M8)

ID: FX-CLAMP

Prijs: 107,00 CHF

Beknopt overzicht: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Menet: M8

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-15-C-130)

ID: H00000383-11

Prijs: 510,00 CHF

Beknopt overzicht: 130 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.

Csúcsátmérő: 15mm
Hosszúság: 130mm
Probe Connection: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-25-C-85)

ID: H00000383-09

Prijs: 510,00 CHF

Beknopt overzicht: 85 mm carbon probe with glue-mounted stainless steel ball Ø25 mm. For use with all Absolute Arm models.

Csúcsátmérő: 25mm
Hosszúság: 85mm
Probe Connection: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with M5-Stylus (R-10-C-75)

ID: H00000576-09

Prijs: 510,00 CHF

Beknopt overzicht: 75 mm carbon probe with mounted ruby ball M5-Stylus Ø10 mm. For use with all Absolute Arm models.

Csúcsátmérő: 10mm
Hosszúság: 75mm
Probe Connection: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with M3-Stylus (R-6-C-350)

ID: H00000576-08

Prijs: 510,00 CHF

Beknopt overzicht: 350 mm carbon probe with mounted ruby ball M3-Stylus Ø6 mm. For use with all Absolute Arm models.

Csúcsátmérő: 6mm
Hosszúság: 350mm
Probe Connection: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Probe with fixed ball (SS-12.7-C-85)

ID: H00000383-07

Prijs: 510,00 CHF

Beknopt overzicht: 85 mm carbon probe with glue-mounted stainless steel ball Ø12.7 mm. For use with all Absolute Arm models.

Csúcsátmérő: 12,7mm
Hosszúság: 85mm
Probe Connection: TKJ Male

Op voorraad – Verzendtijd 1-2 dagen

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Prijs: 337,00 CHF

Beknopt overzicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Menet: M4

Op voorraad – Verzendtijd 1-2 dagen

Articulated Fixture Arm (M8)

ID: FX-ARM

Prijs: 83,00 CHF

Beknopt overzicht: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Menet: M8

Op voorraad – Verzendtijd 1-2 dagen

Slider Block (M4)

ID: FV-SLIDER

Prijs: 15,00 CHF

Beknopt overzicht: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Menet: M4

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prijs: 14,00 CHF

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Hosszúság: 10mm
Átmérő: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Clamp (M4)

ID: FV-SPRING

Prijs: 44,00 CHF

Beknopt overzicht: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Menet: M4

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Support Kit Plus

ID: FX-KINKITPLUS

Prijs: 263,00 CHF

Beknopt overzicht: The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.

Op voorraad – Verzendtijd 1-2 dagen

Resting Cone (M4)

ID: FV-CONE

Prijs: zł58.50

Beknopt overzicht: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Menet: M4

Op voorraad – Verzendtijd 1-2 dagen

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prijs: zł4,005.00

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.