text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP

WMP

Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  600,00 CHF
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  142,00 CHF
Szybki podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  18,00 CHF
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  18,00 CHF
Szybki podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10
  • Átmérő:  8
W magazynie — wysyłka 1–2 dni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Cena:  46,00 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  15,00 CHF
Szybki podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  930,00 CHF
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  940,00 CHF
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  930,00 CHF
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  33,00 CHF
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  50,00 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Cena:  10,00 CHF
Szybki podgląd:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  18,00 CHF
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20
  • Átmérő:  16
W magazynie — wysyłka 1–2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  84,00 CHF
Szybki podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  33,00 CHF
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  26,00 CHF
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  100
  • Átmérő:  16
W magazynie — wysyłka 1–2 dni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  33,00 CHF
Szybki podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
W magazynie — wysyłka 1–2 dni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Cena:  60,00 CHF
Szybki podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Méret:  120 x 45 x 12 mm
W magazynie — wysyłka 1–2 dni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  1 200,00 CHF
Szybki podgląd:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
W magazynie — wysyłka 1–2 dni
Support Stop
Support Stop
ID: FX-SUP__STOP
Cena:  87,00 CHF
Szybki podgląd:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni