Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
SKU: FV-ANGSLIDER
Price:  22,00 CHF
Quick overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Menet:  M4
Stock goods
SKU: FC-70SS3-NF
Price:  930,00 CHF
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
Stock goods
SKU: FC-70SS3
Price:  940,00 CHF
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70
  • Külső befogási tartomány (A):  1 - 71
  • Belső befogási tartomány (I):  18 - 66
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
Stock goods
SKU: FX-BP300__400
Price:  930,00 CHF
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Stock goods
SKU: FX-CTSML
Price:  33,00 CHF
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Stock goods
ID: FV-FEMALE
Price:  33,00 CHF
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In Stock - Despatched 1-2 Days
ID: FV-VEETWIN
Price:  47,00 CHF
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In Stock - Despatched 1-2 Days
ID: FV-GUIDE480
Price:  262,00 CHF
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Lemez kompatibilitás:  FV-200-200C, FV-200/200F, FV-200/200P
In Stock - Despatched 1-2 Days
ID: FV-SO8__20
Price:  10,00 CHF
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20
  • Átmérő:  8
In Stock - Despatched 1-2 Days
ID: FV-CONEADJ
Price:  22,00 CHF
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Menet:  M4
In Stock - Despatched 1-2 Days
ID: FX-CTMED
Price:  33,00 CHF
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
ID: FX-BP300__300
Price:  780,00 CHF
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
In Stock - Despatched 1-2 Days
ID: FX-M8SPRGNUT
Price:  29,00 £
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In Stock - Despatched 1-2 Days
ID: FV-LATSML
Price:  35,00 £
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Hosszúság:  10
  • Átmérő:  8
In Stock - Despatched 1-2 Days
ID: FX-LATMED
Price:  47,00 £
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Hosszúság:  20
  • Átmérő:  16
In Stock - Despatched 1-2 Days
ID: FX-BRONZE__KIT
Price:  891,00 £
Quick Overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
In Stock - Despatched 1-2 Days
ID: FV-SO8__25
Price:  9,00 £
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  25
  • Átmérő:  8
In Stock - Despatched 1-2 Days
ID: FX-BP400__600
Price:  1 591,00 £
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
In Stock - Despatched 1-2 Days
ID: FV-SO8__15
Price:  9,00 £
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  15
  • Átmérő:  8
In Stock - Despatched 1-2 Days
ID: FX-CAPM8__16
Price:  16,00 £
Quick Overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Menet:  M8
In Stock - Despatched 1-2 Days