text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP

WMP

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  3 978,00 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  112,50 zł
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  189,00 zł
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  1 062,00 zł
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Lemez kompatibilitás:  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  40,50 zł
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  8mm
W magazynie — wysyłka 1–2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  63,00 zł
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  40,50 zł
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  25mm
  • Átmérő:  8mm
W magazynie — wysyłka 1–2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  63,00 zł
Szybki podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Hosszúság:  6mm
  • Átmérő:  8mm
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  4 549,50 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  7 767,00 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  90,00 zł
Szybki podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Cena:  6.538,50 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Cena:  1.821,00 €
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  13,00 €
Szybki podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Hosszúság:  10mm
  • Átmérő:  8mm
W magazynie — wysyłka 1–2 dni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Cena:  49,00 €
Szybki podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
W magazynie — wysyłka 1–2 dni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  83,00 €
Szybki podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
W magazynie — wysyłka 1–2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  15,00 €
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
W magazynie — wysyłka 1–2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  14,00 €
Szybki podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10mm
  • Átmérő:  8mm
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  890,00 €
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  900,00 €
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
W magazynie — wysyłka 1–2 dni