text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  3 978,00 zł
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  112,50 zł
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  189,00 zł
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  1 062,00 zł
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Lemez kompatibilitás:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  40,50 zł
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  63,00 zł
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Menet:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  40,50 zł
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  25mm
  • Átmérő:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  63,00 zł
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Hosszúság:  6mm
  • Átmérő:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  4 549,50 zł
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  zł7,767.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Centering Pin
Centering Pin
ID: FV-MALE
Prijs:  zł90.00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Menet:  M4
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  zł6,538.50
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  zł8,194.50
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  zł58.50
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Hosszúság:  10mm
  • Átmérő:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  zł220.50
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  zł373.50
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  zł67.50
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  zł63.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10mm
  • Átmérő:  8mm
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  zł4,005.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  zł4,050.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen