text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
LS-C-5.8 Carrying Case
Azonosító: LS-C-5.8-CASE
Ár: 
Gyors áttekintés:  Carrying case for storage and transport of the Hexagon LS-C-5.8 Laser Scanner Systems for machine tools.
  • Méret:  464 x 363 x 176 mm
  • Anyag:  Műanyagok
  • Kompatibilitás:  LS-C-5.8
Raktáron - Kiszállítás 1-2 napon belül
Extension for 3D-FI Calibration Ball
Azonosító: 3D-FI Extension 45
Ár: 
Gyors áttekintés:  Extension with 45° angle for calibration balls for machine tools.
Raktáron - Kiszállítás 1-2 napon belül
M4-Stylus (SN-2-TC-1.5-L19)
Azonosító: H00027433
Ár: 
  • Előző alkatrészszám:  91.00-T20/2-HM-M4-SI
  • Menet:  M4
  • Csúcs anyaga:  Szilikon-nitrid
  • Csúcsátmérő (D):  2mm
  • Hosszúság (L):  19mm
Raktáron - Kiszállítás 1-2 napon belül
Measuring Unit Extension (L = 115 mm / 4.53")
Azonosító: 41.00-VE115
Ár:  541,00 €
Gyors áttekintés: 

Short description Text

Raktáron - Kiszállítás 1-2 napon belül
Taper Shank ANSI B5.50/CAT50
Azonosító: D28-CAT50-W
Ár:  246,00 €
Gyors áttekintés: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Raktáron - Kiszállítás 1-2 napon belül
Taper Shank JIS BT50
Azonosító: D28-BT50-W
Ár: 
Gyors áttekintés: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Raktáron - Kiszállítás 1-2 napon belül
M8-QUAL sphere V2 - Standard (D = 25.4 mm)
Azonosító: 03939542
Ár:  1 730,00 €
Gyors áttekintés:  Calibration sphere for use with laser scanners for machine tools.
Raktáron - Kiszállítás 1-2 napon belül
Calibration Pin (D = 5 mm)
Azonosító: 5209
Ár:  96,00 €
Gyors áttekintés:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Átmérő:  5mm
  • Hosszúság:  120mm
  • Alkalmazás:  Lézer szerszámbeállító kalibrálás
  • Anyag:  Edzett acél
Raktáron - Kiszállítás 1-2 napon belül
Calibration Pin (D = 10 mm)
Azonosító: 4286
Ár:  103,00 €
Gyors áttekintés:  Calibration pin (D = 10 mm). For use on machine tools.
  • Átmérő:  10mm
  • Hosszúság:  120mm
  • Alkalmazás:  Lézer szerszámbeállító kalibrálás
  • Anyag:  Edzett acél
Raktáron - Kiszállítás 1-2 napon belül
Battery (3.6 V / 1/2AA)
Azonosító: 4316
Ár:  5,50 €
Gyors áttekintés:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Méret:  1/2 AA
  • Feszültség:  3,6V
  • Kapacitás:  1 200mAh
  • Kompatibilitás:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Raktáron - Kiszállítás 1-2 napon belül
T-Nut 14 mm
Azonosító: 4274
Ár:  6,50 €
Gyors áttekintés:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Anyag:  Hőkezelt acél
  • Belső menet:  M12
  • T-horony névleges mérete:  14mm
Raktáron - Kiszállítás 1-2 napon belül
M8-Extension for Calibration Set (D = 25 mm)
Azonosító: 5248
Ár:  47,00 €
Gyors áttekintés:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Külső menet:  M8
  • Belső menet:  M8
  • Átmérő:  25mm
  • Hosszúság:  75mm
  • Anyag:  Rozsdamentes acél
Raktáron - Kiszállítás 1-2 napon belül
Battery (3 V / CR2032)
Azonosító: 5309
Ár:  3,50 €
Gyors áttekintés:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Méret:  9 V Block
  • Feszültség:  9V
  • Kapacitás:  1 200mAh
  • Kompatibilitás:  IRP40.50
Raktáron - Kiszállítás 1-2 napon belül
Measuring Unit Extension (Carbon)
Azonosító: 41.00-VE200
Ár:  341,00 €
Gyors áttekintés:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Anyag:  Szénszál
  • Hosszúság:  200mm
  • Átmérő:  25mm
  • Külső menet:  M16x1
Raktáron - Kiszállítás 1-2 napon belül
Calibration Pin (D = 4 mm / D = 10 mm)
Azonosító: 4420
Ár:  zł1,039.50
Gyors áttekintés:  #N/A
Raktáron - Kiszállítás 1-2 napon belül
Measuring Unit Extension (Carbon)
Azonosító: 41.00-VE300
Ár:  zł2,236.50
Gyors áttekintés:  Extension (300 mm) made of carbon for measuring units on machine tools.
Raktáron - Kiszállítás 1-2 napon belül
Calibration Ball (D = 30 mm / 1.18")
Azonosító: 3468
Ár:  zł1,620.00
Gyors áttekintés:  Calibration sphere (30 mm) made of tungsten carbide with internal M8 thread for use on machine tools.
  • Belső menet:  M8
  • Átmérő:  30mm
  • Anyag:  Wolfram-karbid
  • Gömb átmérő:  30mm
Raktáron - Kiszállítás 1-2 napon belül
Calibration Ball (D = 25 mm / 0.98")
Azonosító: 2675
Ár:  422,05 CHF
Gyors áttekintés:  Calibration sphere (D = 25 mm) made of tungsten carbide with external M12 thread for use on machine tools.
  • Külső menet:  M12
  • Átmérő:  25mm
  • Anyag:  Wolfram-karbid
Raktáron - Kiszállítás 1-2 napon belül
Tool Box 35.70-TB
Azonosító: 35.70-TB
Ár:  95,45 CHF
Gyors áttekintés:  Tool Box for installation and maintenance of Tool Setter IRT35.70. Contents see product description.
  • Kompatibilitás:  IRT35.70
Raktáron - Kiszállítás 1-2 napon belül
Tool Box 25.50-TB
Azonosító: 25.50-TB
Ár:  72,45 CHF
Gyors áttekintés:  Tool Box for installation and maintanance of touch probes IRP25.50 and RWP20.50. Contents see product description.
  • Kompatibilitás:  IRP25.50, RWP20.50
Raktáron - Kiszállítás 1-2 napon belül