text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Azonosító: FV-BP200__200P
Ár:  263,00 CHF
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Centering Pin
Azonosító: FV-MALE
Ár:  20,00 CHF
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix Vision - Full Kit
Azonosító: FV-FULLKIT
Ár:  2 116,00 CHF
Gyors áttekintés:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros CMM
Raktáron - Kiszállítás 1-2 napon belül
Angle Block Slider (M4)
Azonosító: FV-ANGSLIDER
Ár:  19,00 CHF
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Corner Bracket
Azonosító: FV-CNRBRKT
Ár:  49,00 CHF
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Azonosító: FV-BP200__200F
Ár:  337,00 CHF
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M4)
Azonosító: FV-CONE
Ár:  13,00 CHF
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  884,00 CHF
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  31,00 CHF
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  42,00 CHF
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  9,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  47,00 CHF
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  31,00 CHF
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x300x12mm (M8)
Azonosító: FX-BP300__300
Ár:  695,00 CHF
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  31,00 CHF
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Raktáron - Kiszállítás 1-2 napon belül
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Azonosító: FX-LATMED
Ár:  42,00 CHF
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Hosszúság:  20mm
  • Átmérő:  16mm
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Bronze Kit
Azonosító: FX-BRONZE__KIT
Ár:  968,00 CHF
Gyors áttekintés:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x150mm
Azonosító: FX-PR30__150
Ár:  41,00 CHF
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Méret:  30 x 30 x 150mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 25 mm)
Azonosító: FV-SO8__25
Ár:  9,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  25mm
  • Átmérő:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Tension Post (M8)
Azonosító: FX-POST
Ár:  25,00 CHF
Gyors áttekintés:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül