text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  15,00 €
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Menet:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  14,00 €
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10mm
  • Átmérő:  8mm
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  13,00 €
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  890,00 €
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  900,00 €
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  14,00 €
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Hosszúság:  6mm
  • Átmérő:  8mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  1 800,00 €
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros CMM
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  44,00 €
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Menet:  M4
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  31,00 €
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  42,00 €
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Hosszúság:  20mm
  • Átmérő:  16mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  1 011,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Precio:  979,00 €
Resumen:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Existencias disponibles - Envío en 1-2 días
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Precio:  59,00 €
Resumen:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Hosszúság:  50mm
  • Átmérő:  16mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  1 726,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  17,00 €
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Precio:  £15.00
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Precio:  £2,105.00
Resumen:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  £1,253.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  £33.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Méret:  30 x 30 x 100mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  £1,570.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Existencias disponibles - Envío en 1-2 días