text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FX-KINKITPLUS
Ár:  231,44 £
Gyors áttekintés:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FC-70SS3
Ár:  792,00 £
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Befogó tokmány külső átmérője (D1):  70mm
  • Külső befogási tartomány (A):  1 - 71mm
  • Belső befogási tartomány (I):  18 - 66mm
  • Anyag:  Rozsdamentes acél
  • Rögzítés:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-M8SPRGNUT
Ár:  27,28 £
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-ARM
Ár:  73,04 £
Gyors áttekintés:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-CONE
Ár:  11,44 £
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-GOLD__KIT
Ár:  2 148,96 £
Gyors áttekintés:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-SO__MAG
Ár:  12,32 £
Gyors áttekintés:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Hosszúság:  10mm
  • Átmérő:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-CNRBRKT
Ár:  43,12 £
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-ANGSLIDER
Ár:  16,72 £
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-BP200__200F
Ár:  296,56 £
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-BP300__400
Ár:  777,92 £
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Menet:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-MALE
Ár:  17,60 £
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Menet:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-SO8__20
Ár:  7,92 £
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-CTSML
Ár:  27,28 £
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-STARTERKIT
Ár:  1 584,00 £
Gyors áttekintés:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M4
  • Alkalmazás:  Multiszenzoros CMM
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO20__20
Ár:  14,08 £
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  20mm
  • Átmérő:  20mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO__PIN
Ár:  17,60 £
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Hosszúság:  25mm
  • Átmérő:  16mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO20__100
Ár:  21,12 £
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Hosszúság:  100mm
  • Átmérő:  20mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-STARTER__KIT
Ár:  963,60 £
Gyors áttekintés:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Menet:  M8
  • Alkalmazás:  CMM, Hordozható mérőkar
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30__200
Ár:  38,72 £
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Méret:  30 x 30 x 200mm
Raktáron - Kiszállítás 1-2 napon belül