text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catalogus
  3. CMM

CMM

Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  20,00 €
Resumen:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1 453,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  38,00 €
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 100mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  1 821,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  13,00 €
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  49,00 €
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  107,00 €
Resumen:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  29,00 €
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  15,00 €
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  453,00 €
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Existencias disponibles - Envío en 1-2 días
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Precio:  91,00 €
Resumen:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Precio:  60,00 €
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  20mm
  • Diamètre:  20mm
Existencias disponibles - Envío en 1-2 días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  83,00 €
Resumen:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  15,00 €
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  14,00 €
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  44,00 €
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Precio:  263,00 €
Resumen:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  13,00 €
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Precio:  CHF495.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Precio:  CHF832.00
Resumen:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Plaque adaptable:  KPP-500/500, KPT-500/500
Existencias disponibles - Envío en 1-2 días