Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Preis:  2 387,40 CHF
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Preis:  17,25 CHF
Schnellübersicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10mm
  • Diamètre:  8mm
Auf Lager – Versand 1–2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  64,40 CHF
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Auf Lager – Versand 1–2 Tage
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Preis:  140,30 CHF
Schnellübersicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Preis:  63,25 CHF
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Preis:  11,50 CHF
Schnellübersicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Preis:  20,70 CHF
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  16mm
Auf Lager – Versand 1–2 Tage
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Preis:  47,00 CHF
Schnellübersicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Preis:  103,50 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100mm
  • Diamètre:  16mm
Auf Lager – Versand 1–2 Tage
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Preis:  243,00 zł
Schnellübersicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mmmm
Auf Lager – Versand 1–2 Tage
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Preis:  63,00 zł
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10mm
  • Diamètre:  8mm
Auf Lager – Versand 1–2 Tage
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Preis:  198,00 zł
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetage:  M4
Auf Lager – Versand 1–2 Tage
Support Stop
Support Stop
ID: FX-SUP__STOP
Preis:  373,50 zł
Schnellübersicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Preis:  58,50 zł
Schnellübersicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M4
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Preis:  4.005,00 zł
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
Auf Lager – Versand 1–2 Tage
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Preis:  112,50 zł
Schnellübersicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Auf Lager – Versand 1–2 Tage
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Preis:  90,00 zł
Schnellübersicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  10mm
  • Diamètre:  15mm
Auf Lager – Versand 1–2 Tage
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Preis:  72,00 zł
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30mm
  • Diamètre:  20mm
Auf Lager – Versand 1–2 Tage
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Preis:  409,50 zł
Schnellübersicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Vee Locator
Vee Locator
ID: FX-VEE
Preis:  333,00 zł
Schnellübersicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage