text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prijs:  10 670,00 zł
Beknopt overzicht:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  73,00 zł
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  216,00 zł
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  91,00 zł
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  2 506,00 zł
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  3 888,00 zł
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
Centering Pin
Centering Pin
ID: FV-MALE
Prijs:  99,00 zł
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  43,00 zł
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Single
Vee Block Single
ID: FV-VEE
Prijs:  134,00 zł
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  138,00 zł
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  4 925,00 zł
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M4
  • Application:  Multisensor CMM
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  1 979,00 zł
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  £35.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  10mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  £42.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  £15.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  6mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  £41.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  £491.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  £16.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prijs:  £370.00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  £818.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
Op voorraad – Verzendtijd 1-2 dagen