text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Precio:  6 500,00 €
Resumen:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Comptabilité:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  540,00 €
Resumen:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  466,00 €
Resumen:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  263,00 €
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  19,00 €
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  337,00 €
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  890,00 €
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  900,00 €
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  884,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  31,00 €
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  25,00 €
Resumen:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  42,00 €
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  236,00 €
Resumen:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plaque adaptable:  FV-200-200C, FV-200/200F, FV-200/200P
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  9,00 €
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  14,00 €
Resumen:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  31,00 €
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  695,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  €31.00
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  €32.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  €42.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  20mm
  • Diamètre:  16mm
Existencias disponibles - Envío en 1-2 días