text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
ID: 03969065
Precio:  171,00 £
Resumen:  Rallonge M8/M8 en aluminium d'une longueur de 50 mm
  • Longueur (L):  50
  • Matériau:  Aluminium
Existencias disponibles - Envío en 1-2 días
ID: 03939495
Precio:  791,00 £
Resumen:  Optional crash protection for HR-MP racks
  • Protection de collision:  Qui
  • Déplacement X/Y:  20
  • Déplacement Z:  10
  • Longueur:  110
  • Diamètre:  19.5
Existencias disponibles - Envío en 1-2 días
ID: 03939498
Precio:  509,00 £
Resumen:  Upgrade pack to standard probe module changer rack
  • Protection de collision:  Non
  • Recalibrage automatique:  Non
Existencias disponibles - Envío en 1-2 días
ID: 03939481
Precio:  2 182,00 £
Resumen:  6-port probe module changer rack with a height of 90 mm
  • Nombre de ports:  6
  • Hauteur:  88
  • Protection de collision:  Qui
Existencias disponibles - Envío en 1-2 días
ID: 03939305
Precio:  1 455,00 £
  • Référence:  03939305
Existencias disponibles - Envío en 1-2 días
ID: 03939303
Precio:  936,00 £
Existencias disponibles - Envío en 1-2 días
ID: 03939542
Precio:  1 591,00 £
Resumen:  Calibration sphere for use with laser scanners for machine tools.
Existencias disponibles - Envío en 1-2 días
ID: FV-ANGSLIDER
Precio:  22,00 CHF
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
ID: FC-70SS3-NF
Precio:  930,00 CHF
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
Existencias disponibles - Envío en 1-2 días
ID: FC-70SS3
Precio:  940,00 CHF
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
Existencias disponibles - Envío en 1-2 días
ID: FX-BP300__400
Precio:  930,00 CHF
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
ID: FX-CTSML
Precio:  33,00 CHF
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
ID: FV-FEMALE
Precio:  33,00 CHF
Resumen:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Existencias disponibles - Envío en 1-2 días
ID: FV-VEETWIN
Precio:  47,00 CHF
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
ID: FV-GUIDE480
Precio:  €254.00
Resumen:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plaque adaptable:  FV-200-200C, FV-200/200F, FV-200/200P
Existencias disponibles - Envío en 1-2 días
ID: FV-SO8__20
Precio:  €10.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20
  • Diamètre:  8
Existencias disponibles - Envío en 1-2 días
ID: FV-CONEADJ
Precio:  €21.00
Resumen:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
ID: FX-CTMED
Precio:  €32.00
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
ID: FX-BP300__300
Precio:  €750.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
ID: FX-M8SPRGNUT
Precio:  €32.00
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días