text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. Obrabiarka

Obrabiarka

Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
ID: 3D-FI Extension 45
Cena:  82,00 £
Szybki podgląd:  Extension with 45° angle for calibration balls for machine tools.
W magazynie — wysyłka 1–2 dni
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Cena:  476,08 £
Szybki podgląd: 

Short description Text
W magazynie — wysyłka 1–2 dni
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
ID: D28-CAT50-W
Cena:  216,48 £
Szybki podgląd: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
W magazynie — wysyłka 1–2 dni
Taper Shank JIS BT50
Taper Shank JIS BT50
ID: D28-BT50-W
Cena: 
Szybki podgląd: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
W magazynie — wysyłka 1–2 dni
LS-C-5.8 Carrying Case
LS-C-5.8 Carrying Case
ID: LS-C-5.8-CASE
Cena: 
Szybki podgląd:  Carrying case for storage and transport of the Hexagon LS-C-5.8 Laser Scanner Systems for machine tools.
  • Taille:  464 x 363 x 176 mm
  • Matériau:  Plastics
  • Comptabilité:  LS-C-5.8
W magazynie — wysyłka 1–2 dni
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
ID: H00027433
Cena: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Filetage:  M4
  • Matériau pointe:  Nitrure de silicium
  • Diamètre pointe (D):  2mm
  • Longueur (L):  19mm
W magazynie — wysyłka 1–2 dni
Calibration Pin (D = 5 mm)
Calibration Pin (D = 5 mm)
ID: 5209
Cena:  83,00 £
Szybki podgląd:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diamètre:  5mm
  • Longueur:  120mm
  • Application:  Laser Tool Setter Calibration
  • Matériau:  Steel, hardened
W magazynie — wysyłka 1–2 dni
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Cena:  3,00 £
Szybki podgląd:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Taille:  9 V Block
  • Tensio:  9V
  • Capacity:  1 200mAh
  • Comptabilité:  IRP40.50
W magazynie — wysyłka 1–2 dni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Cena:  294,00 £
Szybki podgląd:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Matériau:  Fibre de carbone
  • Longueur:  200mm
  • Diamètre:  25mm
  • External Thread:  M16x1
W magazynie — wysyłka 1–2 dni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Cena:  401,00 £
Szybki podgląd:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Longueur:  150mm
  • Diamètre:  25mm
  • External Thread:  M16x1
W magazynie — wysyłka 1–2 dni
T-Nut 22 mm
T-Nut 22 mm
ID: 4411
Cena:  22,00 £
Szybki podgląd:  T-Nut for the mounting of measuring systems and accessories in machine tools.
W magazynie — wysyłka 1–2 dni
T-Nut 12 mm
T-Nut 12 mm
ID: 4418
Cena:  5,00 £
Szybki podgląd:  T-Nut for the mounting of measuring systems and accessories in machine tools.
W magazynie — wysyłka 1–2 dni
T-Nut 18 mm
T-Nut 18 mm
ID: 4431
Cena:  12,00 £
Szybki podgląd:  T-Nut for the mounting of measuring systems and accessories in machine tools.
W magazynie — wysyłka 1–2 dni
Calibration Ball (D = 30 mm / 1.18")
Calibration Ball (D = 30 mm / 1.18")
ID: 3468
Cena:  310,00 £
Szybki podgląd:  Calibration sphere (30 mm) made of tungsten carbide with internal M8 thread for use on machine tools.
  • Inside Thread:  M8
  • Diamètre:  30mm
  • Matériau:  Carbure de tungstène
  • Sphere Diameter:  30mm
W magazynie — wysyłka 1–2 dni
Calibration Ball (D = 25 mm / 0.98")
Calibration Ball (D = 25 mm / 0.98")
ID: 2675
Cena:  278,00 £
Szybki podgląd:  Calibration sphere (D = 25 mm) made of tungsten carbide with external M12 thread for use on machine tools.
  • Outside Thread:  M12
  • Diamètre:  25mm
  • Matériau:  Carbure de tungstène
W magazynie — wysyłka 1–2 dni
Measuring Unit Extension (L = 340 mm / 13.39")
Measuring Unit Extension (L = 340 mm / 13.39")
ID: 41.00-VE340
Cena:  484,88 £
Szybki podgląd: 

Short description Text
W magazynie — wysyłka 1–2 dni
Tool Box 25.50-TB
Tool Box 25.50-TB
ID: 25.50-TB
Cena:  47,00 £
Szybki podgląd:  Tool Box for installation and maintanance of touch probes IRP25.50 and RWP20.50. Contents see product description.
  • Comptabilité:  IRP25.50, RWP20.50
W magazynie — wysyłka 1–2 dni
Calibration Ball Set 1
Calibration Ball Set 1
ID: 3D-FI EICHKUGEL SET1
Cena:  659,00 €
Szybki podgląd:  Calibration set for magentic mounting on machine tool tables. Content see product description.
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  30mm
W magazynie — wysyłka 1–2 dni
Calibration Ball Set 4  
Calibration Ball Set 4  
ID: 3D-FI EICHKUGEL SET4
Cena:  1 082,00 €
Szybki podgląd:  Calibration set for magnetic mounting on the machine tool table. For contents, see producct description.
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  10mm
W magazynie — wysyłka 1–2 dni
Screw plug for cross adapter 41.00-KA
Screw plug for cross adapter 41.00-KA
ID: 41.00-KA-V
Cena:  35,00 €
Szybki podgląd:  Screw plug for measuring unit cross adapter 41.00-KA. For use on machine tools.
  • Matériau:  Plastics
  • External Thread:  M16x1
W magazynie — wysyłka 1–2 dni