text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
N° : FV-BP200__200C
Prix:  263,00 €
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Angle Block Slider (M4)
N° : FV-ANGSLIDER
Prix:  19,00 €
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  13,00 €
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10mm
  • Diamètre:  8mm
En stock - Livraison sous 1 à 2 jours
Corner Bracket
N° : FV-CNRBRKT
Prix:  49,00 €
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Single
N° : FV-VEE
Prix:  29,00 €
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
N° : FV-POST
Prix:  15,00 €
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
N° : FV-BP200__200F
Prix:  270,00 $
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Slider Block (M4)
N° : FV-SLIDER
Prix:  9,00 $
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Standoff Magnet  (D = 8 mm / L = 10 mm)
N° : FV-SO__MAG
Prix:  10,00 $
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10mm
  • Diamètre:  8mm
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M4)
N° : FV-SPRING
Prix:  44,00 $
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
N° : FV-CONE
Prix:  9,00 $
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetage:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  890,00 $
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  1 026,00 $
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
N° : FX-THUMB
Prix:  9,00 $
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Swift-Fix Tool Kit
N° : FX-TOOLS
Prix:  27,00 $
Vue d'ensemble sommaire:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
En stock - Livraison sous 1 à 2 jours
Universal Joint
N° : FX-UNI__JOINT
Prix:  87,00 $
Vue d'ensemble sommaire:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Toggle Clamp
N° : FX-TOG
Prix:  121,00 $
Vue d'ensemble sommaire:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  794,00 $
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  28,00 $
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
N° : FX-SPRING
Prix:  43,00 $
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours