Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Preis:  495,00 €
Schnellübersicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  884,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Preis:  758,00 €
Schnellübersicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-400/400, KB-UNIVL
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Preis:  31,00 €
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Vee Locator
ID: FV-FEMALE
Preis:  25,00 €
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Auf Lager – Versand 1–2 Tage
Vee Block Twin
ID: FV-VEETWIN
Preis:  42,00 €
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Auf Lager – Versand 1–2 Tage
Spring Clamp (M8)
ID: FX-SPRING
Preis:  48,00 €
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Thumb Screw M8
ID: FX-THUMB
Preis:  9,00 €
Schnellübersicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  236,00 €
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plaque adaptable:  FV-200-200C, FV-200/200F, FV-200/200P
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Preis:  9,00 €
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  8mm
Auf Lager – Versand 1–2 Tage
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  14,00 €
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Preis:  16,00 €
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  16mm
Auf Lager – Versand 1–2 Tage
Hinge Pivot With Handle
ID: FX-PR30HINGE
Preis:  47,00 €
Schnellübersicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Preis:  31,00 €
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Preis:  695,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Preis:  23,00 €
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100mm
  • Diamètre:  16mm
Auf Lager – Versand 1–2 Tage
Spring Nut (M8)
ID: FX-M8SPRGNUT
Preis:  31,00 €
Schnellübersicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Auf Lager – Versand 1–2 Tage
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Preis:  54,00 €
Schnellübersicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mmmm
Auf Lager – Versand 1–2 Tage
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Preis:  1.095,00 €
Schnellübersicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Auf Lager – Versand 1–2 Tage
Support Stop
ID: FX-SUP__STOP
Preis:  83,00 €
Schnellübersicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetage:  M8
Auf Lager – Versand 1–2 Tage