As part of our new security upgrades, you are requested to reset your password

Fixtures

94 Product(s) found

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Price: 383 590,00 zł

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diamètre extérieur du mandrin (D1): 70mm
Plage de serrage extérieur (A): 1 - 71mm
Plage de serrage intérieur (I): 18 - 66mm
Matériau: Acier inoxydable
Fixation (G): M3

In Stock - Despatched 1-2 Days

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Price: 213 345,00 zł

Quick Overview: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-250/250, KB-UNIVL

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: 381 004,00 zł

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

In Stock - Despatched 1-2 Days

Kinematic Fixture Plate 500x500mm (Plain)

ID: KPP-500__500

Price: 326 698,00 zł

Quick Overview: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-400/400, KB-UNIVL

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: 13 361,00 zł

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Vee Locator

ID: FV-FEMALE

Price: 10 775,00 zł

Quick Overview: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In Stock - Despatched 1-2 Days

Vee Block Twin

ID: FV-VEETWIN

Price: 18 102,00 zł

Quick Overview: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In Stock - Despatched 1-2 Days

Spring Clamp (M8)

ID: FX-SPRING

Price: 20 688,00 zł

Quick Overview: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Thumb Screw M8

ID: FX-THUMB

Price: 3 879,00 zł

Quick Overview: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetage: M8

In Stock - Despatched 1-2 Days

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Price: zł1,127.00

Quick Overview: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Plaque adaptable: FV-200-200C, FV-200/200F, FV-200/200P

In Stock - Despatched 1-2 Days

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Price: zł43.00

Quick Overview: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 8mm

In Stock - Despatched 1-2 Days

Cone Adjustable (M4)

ID: FV-CONEADJ

Price: zł95.00

Quick Overview: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetage: M4

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Price: zł77.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 16mm

In Stock - Despatched 1-2 Days

Hinge Pivot With Handle

ID: FX-PR30HINGE

Price: zł361.00

Quick Overview: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

In Stock - Despatched 1-2 Days

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Price: zł142.00

Quick Overview: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Price: zł3,354.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Price: zł112.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 100mm
Diamètre: 16mm

In Stock - Despatched 1-2 Days

Spring Nut (M8)

ID: FX-M8SPRGNUT

Price: zł142.00

Quick Overview: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

In Stock - Despatched 1-2 Days

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Price: zł258.00

Quick Overview: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Taille: 120 x 45 x 12 mmmm

In Stock - Despatched 1-2 Days

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Price: zł5,160.00

Quick Overview: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetage: M8
Application: MMT, Bras de mesure portables

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours